Sebury B6-EH Plus, User Manual

Page: 31 / 35

B6 Plus Series Standalone Access Controller User Manual V1.0
Sebury Technology Co., Ltd
http://www.sebury.com.cn
第
31
页
Way to enter menu : * (Hold down for more than 2 seconds), (Admin password) #
Menu Parameter or operation step Function Default value
30
0# Open door way by card
2 1# Open door way by card and PIN
2# Open door way by card or PIN
31
1# Set one card to open door
1
(1-10)# Set 2-10 cards together to open door
32
0# Set lock to Delay mode
0 1# Set lock to Switch mode
2# Set the lock to Normal-open mode
33
0# Disable users to use.
1
1# Enable users to use.
34
0# Set Open-time to 50mS
2
(1-999)# Set Open-time from 1 to 999S
35 (0-99)#
After opening the door, delay 0-99 seconds
to start the tone
10
36 (0-99)# Set the closing prompt tone for 0-99 seconds. 10
40
0,# Set the alarm time to 0, means no alarm
0
(1-99)# Set the alarm time to 1-99 minutes
41
0# Disable anti-dismantle alarm function.
0
1# Enable anti-dismantle alarm function.
42
0# Alarm lead output alarm signal voltage
0
1# Alarm lead output doorbell signal voltage
43
0# Normal operate mode
0 1# Enable anti-crack alarm function
2# Enable anti-crack locked function
44 (1-10)# Set anti-crack wrong time 1-10 10
45 (1-99)# Set anti-crack locked time 1-99 minutes 10
50
0# Indicator light is always off
1
1# Red indicator light is always on
2#
Green indicator light is always on(reader
mode)
51
1,1,…,#
Decrease the brightness of the normally
bright red indicator
18
2,2,…,#
Increase the brightness of the normally bright
red indicator
52
0# Key backlit is always off
1
1# Key backlit is always on
(2-99)#
After delay 2-99 seconds, Key backlit turn to
micro light
53
1,1,…,# Decrease the brightness of the backlit
14
2,2,…,# Increase the brightness of the backlit
54 0# Disable the buzzer 1