Maintenance
Always unplug vacuum from outlet before dismantling any part of the machine!
Changing the Dust Bag -Figure 9
To change the dust bag, pull the cover release flap forward (#5 on page
5) and lift the cover (7) from the dust bag housing. The cover release flap
must remain in a for- ward �pulled-out� position to change dust bags
and lock them into place. Squeeze the clamps on both sides of the dust
bag sealing plate (29), slide the plate from the holder (30) and push the
cap on to seal the bag. Slide the sealing plate (29) of a new bag into the
holder and push it in firmly. Re-insert cover into dust bag housing, push it
for- ward, then lock it in place by pushing down the cover release flap.
You may find it convenient to store the bag cap inside the dust bag housing below the dust bag.
Changing the Micro-Hygiene Filter - Figure 10
The micro-hygiene filter (31) needs to be changed when it becomes
extremely dirty or clogged with dust, or after approximately 20 dust bags
have been used. To change the micro-hygiene filter, pull the cover
release flap (#5 on page 5) forward and lift the cover (7) from the dust
bag housing. Then, slide the filter out at the bottom. To replace, lift the
safety lever (32) and slide the new filter in using the tracks as guides.
Changing the Exhaust Filter -Figure 11
After 20 bags have been used, change the exhaust filter (33). Remove
the dust bag housing (6) from the power head by pressing the housing
release button (8). To remove the exhaust filter, push the catch (34) and
remove the filter cover (35) and exhaust filter. Insert the new filter,
replace the filter cover then insert the dust bag housing back into the
power head.
Changing the Brush Roller -Figure 12
To change the brush roller (37), push the button (36), remove the side
plate (38), turn the brush clockwise a quarter of a turn, and pull the old
brush roller out. Slide the new brush roller into the brush housing and turn it until it locks into position.
While slightly pushing the but- ton (36), press the side plate (38) back into the locked position.