OPERATING INSTRUCTIONS
Preparing The Floor
Remove as much furniture as possible,
and cover any left in place.
First Cleaning:
1. Vacuum the floor thoroughly before
using the SEBO DISCO for the first
time, ensuring it is completely free of
debris, such as grit.
2. Add some floor maintainer to the
water, as per the instructions, if
required, and clean the floor with a
mop. Wait for the floor to dry complete-
ly before proceeding to step 3.
3. Apply an appropriate floor mainte-
nance product* in accordance with the
instructions. Before polishing the floor,
ensure that the floor is completely dry
then proceed to step 4.
4. Move the SEBO DISCO slowly over
the floor similar to how you would use
your vacuum cleaner.
Intermediate Maintenance:
Regular polishing of the coating will maintain an even finish and will ensure a longer lasting bright appearance of the floor.
Vacuum the floor first, before using the polisher, to remove dirt and dust.
NOTE: Vacuum the floor surface THOROUGHLY before using the polisher. Grit and debris left on the floor can cause dam-
age. Always inspect the pad before use - any grit that becomes embedded in the pad can damage your floor.
WARNING!
The quality, condition, coating, texture, age and manufacturing technique of all floor surfaces vary.
Therefore, machines with rotating pads, including your SEBO DISCO, may damage some floor surfaces. Some types of hard-
wood floors, cushion vinyl, cork and porous stone or tile are particularly vulnerable to damage by rotating brushes or pads. When
possible, consult the materials supplied by your floor’s manufacturer for information on proper upkeep and cleaning.
To ensure that your new SEBO DISCO is compatible with your floor, please test the polisher on each type of flooring surface
in a small inconspicuous area to determine if any damage occurs. If damage occurs, stop using the polisher immediately!
!
6
Floor Suitability
* Please refer to the maintenance guide of the manufacturers of your floors for recommended maintenance and
floor maintainers.
Suitable
Marble, Granite, Terazzo
Linoleum, Vinyl,
Thermoplastic
Limited Suitability
Sealed wood floor with
water resistant finish
Wooden floor - unsealed or
oiled
Porous natural stone, e.g.
slate
Laminate with water
resistant finish
Unsuitable**
Cork
Porous tile, e.g. terracotta
Cushion vinyl
** Please note that damage may occur if used on these types of floors.
1. Vacuum the floor
thoroughly to
remove grit and
debris.
2. Mop the floor.
3. Apply floor
maintenance prod-
uct. Ensure that the
floor is completely
dry before proceed-
ing to step 4.
4. Polish the
floor.
All manuals and user guides at all-guides.com
all-guides.com
