IDENTIFICATION OF PARTS
5
ASSEMBLY
1. Bumper
2. Suction duct access cover
3. Bumper
4. Release button
5. Swivel neck
6. Head release button
7. Foot pedal
8. Clog/overload warning light
9. Power indication light
10. Support castor
11. Seal
12. Castor
13. Floor pad
14. Pad retainer
Fit the floor pad (13) to the pad retainer (14), using the notches as a guide for
correct position. Press the pad down onto the pad retainer (14) until it locks
in place. See figure 1.
Press the retainer tabs (15) in using your thumb and forefinger and turn the
pad clockwise until it locks into place again. See figure 2
To attach the DISCO to your SEBO FELIX, C3.1 or K3:
place the DISCO on the
floor with the swivel neck (5) upright. Hold the vacuum vertically and Insert
the suction opening of the FELIX (16) or the electric telescopic tube (17) of
your C3.1 or K3 into the swivel neck of the head. Push firmly and evenly
downward until the head release button (6) snaps into the locked position.
See figure 3.
To attach the DISCO to your central vac wand:
Use the SEBO adapter
(#18, figure 4 - part # 2780 AM)
5
2
1
2
3
4
5
6
7
8
9
3
14
11
10
11
12
12
13
14
Figure 1
Figure 2
Figure 3
13
15
14
15
5
5
16
17
6
6
Figure 4
18
All manuals and user guides at all-guides.com
