Signals are placed on the connector to the remote control system according to the following table:
Pin number
Signal name
Notes
1
+VALIM
Power supply input (+24V) and remote signals
reference
2
TS51A
TS51A relay output
3
TSPRESV
TSPresV relay output
4
OUT_4-20+
4÷20 mA current output (+)
5
TS67AV
TS67AV relay output
6
OUT_4-20-
4÷20 mA current output (-)
7
+VALIM
Reverse signal digital input (common)
8
INV_IN
Reverse signal digital input
9
-VALIM
Power supply input (GND 24V)
Connection with combined sensors
To facilitate the connection between the cables of the combined sensors and the RGDAT-A70, this
one is supplied with a proper adapter; one side of the adapter is connected to the terminal block MA
and the other side has 3 connectors RJ45 to plug the cables of the combined sensors.
The adapter is factory connected to terminal block MA.
Each RJ45 connector has a label to indicate the related phase.
The following image refers to the above indicated arguments.
P515D851 Rev. E
November 2019
Pag. 17 of 45
