PrimeTest 300
Operating
Instructions
10.2.4 Data
Entry
In Automatic mode it is required that an asset id number
be entered prior to starting a test. This can be done
either by using the keypad only, using the keypad and a
barcode scanner or using the keypad and an RFID
wand. Use the left/right arrow keys to set.
Note: In data entry mode the unit will automatically
try to connect to a barcode scanner or RFID
wand via the internal Bluetooth module – if
neither is available this feature is simply
draining the batteries un-necessarily. In this
instance it is recommended that the unit be set
to Keypad only.
10.2.5 Backlight
Mode
The backlight on the PrimeTest 300 can be set to either,
never come on, stay on permanently or come on in
Power Save mode. Power save mode ensures that the
backlight comes on when a key is pressed and stays on
for several seconds before switching itself off again. Use
the left/right arrow keys to set.
10.2.6 Type of User
The user type can be set to Novice or Expert. For
Novice users, additional help prompts are provided
during test sequence.
10.2.7 Tones
The
Tones
(F3) key will select a screen which will allow
the various tones to be set up, i.e. Beep on Key Press or
Beep on Warning etc. Use up/down arrow keys to
highlight desired function and the left/right arrow keys to
set.
10.3 Change User
The PrimeTest 300 has a password protected User
system to prevent unauthorised modifications to the
configuration.
- 38 -
