Seat 300 MP3, Owner'S Manual

Page: 35 / 49

Navigation 34
In the lower part of the list, details of the selected destination are displayed.
Load itineraries
A list of recorded itineraries is displayed. Select an itinerary from the list
using the menu button.
Save an itinerary
An itinerary entered in the destination memory is saved. The equipment auto-
matically proposes a name for the itinerary. This may be changed using the
menu button
⇒
page 34, “Character input mask”.
Up to six itineraries may be saved, each one with a final destination and a
maximum of six stages. If there are already six itineraries saved, one must be
erased before saving another.
Erase itineraries
It is possible to erase the itineraries one by one or all at the same time.
Save position
This saves the actual position in memory as a destination. The proposed
name may be modified on the display
⇒
page 34, “Character input mask”.
Flagged destination
Press to save the current position in the destination memory. The flagged
destination is saved with the time ( FLAG DEST HH:MM ); it may be renamed or
saved using the option Edit the destination memory . When the button is
pressed again, the flagged destination will be overwritten if it has not been
stored in the destination memory
⇒
page 33, “To edit the destination
memory”.
Character input mask
The letters and digits
⇒
page 32, fig. 18 are selected by rotating the menu
button and are added to the corresponding line pressing.
A mark may be displayed under certain letters. If these letters are selected
and some seconds go by, the special characters will appear. The corre-
sponding character is selected by rotating and pressing the menu button (in
the example, the characters derived from “Y”:
⇒
page 32, fig. 18 ).
– Arrows to the left and to the right. These move the cursor in the corre-
sponding direction.
– This erases the characters one by one, beginning from the right.
– To leave the character input mask. Changes must still be saved.
Note
•
If “Route with intermediate destinations” is selected, the last destination
or last itinerary is added. The selected destination may be moved to the
required position in the itinerary using the menu button, if only one destina-
tion is required, first deactivate the
Route with stages option in the “route
options” (access using the menu
⇒
page 29, fig. 15 ).
•
The options between square brackets [ ... ] can not be selected because
they do not conform to the conditions. The options Load itinerary and Save
an itinerary , for example, can only be selected if the corresponding
menu option is available
⇒
page 29, fig. 15 .
•
A destination will not be stored in Last dest. until destination guide has
started.
•
The memory has a capacity for 100 destinations. If you are not able to
store any more destinations, the destination memory is full. A destination
must be erased from the memory before saving another.




ERASE
OK
ROUTE
ROUTE
Radionaveg300_angles Seite 34 Donnerstag, 13. Oktober 2005 11:48 11