Seat 2014 LEON CUP RACER, Owner'S Manual

Page: 178 / 284

Operation
In this
equipment, a visual display of the vehi-
cle’s trajectory is not available. In any
event, a
white segment is displayed if
there is an obstacle at a distance of
more than 30 cm. A
red segment is dis-
played if there is an obstacle at a dis-
tance of less than 30 cm from the vehi-
cle. Whenever the obstacle is located in
the vehicle’s direction of travel, the cor-
responding audible warning will sound.
As the vehicle approaches an obstacle, the
segments are displayed closer to the vehicle.
When the penultimate segment is displayed,
this means that the vehicle has reached the
collision zone. In the collision zone, the ob-
stacles are represented in red, including
those out of the path. Do not continue to
move forward (or backward)
›››
in General
information on page 173 ,
›››
in General in-
formation on page 173 !
Automatic activation
When the parking aid (ParkPilot) is automati-
cally switched on, a miniature image of the
vehicle and segments will appear on the left
side of the display
›››
Fig. 170 .
Automatic activation occurs when slowly ap-
proaching an obstacle located in front of the
SEAT Media System Touch/Colour: vehicle. It only operates every time the speed
is reduced below approximately 10 km/h (6
mph) for the first time. If the parking aid is
switched off using the

button, the follow-
ing actions must be carried out in order for it
to automatically switch on:
●
Switch off the ignition and switch it on
again.
● OR: accelerate above 10 km/h (6 mph) be-
fore reducing speed below this number
again.
● OR: place the selector lever in position P
and then move it from this position.
● OR: switch on and off the automatic activa-
tion in the Easy Connect system menu.
The automatic activation with parking aid
miniature indication can be switched on and
off from the Easy Connect system menu
›››

page 17 :
●
Switch the ignition on.
● Press button

.
● Press the
Setup
function button.
●
Press the
Parking and Manoeuvring
function
button.
●
Select the parking aid (ParkPilot) from the
list.
● Automatic activation.
When the function button check box is activa-
ted

, the function is on.
Adjusting the display and audible
warnings
The settings for the display and audible
warnings are controlled via the Easy Con-
nect*.
– Select:
CAR
button > Settings > Parking and
manoeuvring
›››

page 17 .
Park Pilot activated
1)

on – the parking aid remains activated.

off – the parking aid remains deactivated
whilst the ignition is on. Once the ignition
has been switched off, the system will reacti-
vate automatically.
Automatic activation

on – activates the Automatic activation op-
tion
›››
page 176 .

off – deactivates the Automatic activation
option
›››
page 176 .
1) Only available with certain equipment: Navi Sys-
tem Plus.
176