Cable Connection Guide
PUSH to OPEN THROTTLE
STARBOARD INSTALLATION
CENTER INSTALLATION
MANUFACTURER
CABLE
NEST KIT
THROTTLE
LEVER
CABLE
NEST KIT
THROTTLE
LEVER
Mercury 18 & 25 HP
#1
#1
#1
#1
Johnson/Evinrude
#1
#1
#1
#1
BRP/OMC I/O
#1
#1
#1
#1
Yamaha 90HP & up
#1
#1
#1
#1
US Marine
#1
#1
#1
#1
Suzuki
#1
#1
#1
#1
PULL to OPEN THROTTLE
STARBOARD INSTALLATION
CENTER INSTALLATION
MANUFACTURER
CABLE
NEST KIT
THROTTLE
LEVER
CABLE
NEST KIT
THROTTLE
LEVER
MerCruiser
Mercury I/O & OB
#2
#2
#2
#2
Volvo
#2
#2
#2
#2
Yamaha 70HP & Under
#2
#2
#2
#2
Honda
#2
#2
#2
#2
Nissan/Tohatsu
#2
#2
#2
#2
PUSH for FORWARD SHIFT
STARBOARD INSTALLATION
CENTER INSTALLATION
MANUFACTURER
CABLE
NEST KIT
SHIFT
LEVER
CABLE
NEST KIT
SHIFT
LEVER
Volvo I/O & Inboards
#3
#3
#4
#4
3300 Cables
#3
#3
#4
#4
Mercury 18 & 25 HP
#5/6
#6
#7/8
#7
Inboards
#3
#3
#4
#4
PULL for FORWARD SHIFT
STARBOARD INSTALLATION
CENTER INSTALLATION
MANUFACTURER
CABLE
NEST KIT
SHIFT
LEVER
CABLE
NEST KIT
SHIFT
LEVER
3300 Cables
#4
#4
#3
#3
MerCruiser
Mercury I/O & OB
#7/8
#7
#5/6
#6
BRP/OMC I/O
Evinrude/Johnson
#7/8
#8
#5/6
#5
Honda/Nissan/Suzuki
#4
#4
#3
#3
Tohatsu/US Marine
#4
#4
#3
#3
Yamaha
#4
#4
#3
#3
Inboards
#4
#4
#3
#3
Cable Mounting Diagram
SECTION 3: SHIFT & THROTTLE CABLE
CONNECTION-CONTROL END.
•
PUSH/PULL
refer to the direction of cable motion to shift into “for-
ward” or to “open” the throttle.
•Refer to the appropriate manufacturer’s manual for shift and throttle
direction and adjustments.
•
Numbered holes on mechanism chassis correspond to holes in shift
and throttle levers
(for example: connect cable mount to hole 4 on
chassis and cable end fitting to hole 4 on lever).
•Cables and wiring should be pre-installed on control before final
mounting is made.
NOTE:
I/O = Inboard/Outboard or Sterndrive.
O/B = Outboard.
Page 6 of 20
SeaStar Solutions Installation Instructions and Owner’s Manual
Telephone: 610-495-7011
