Maintenance Notes
1. After a few hours of operation and at frequent intervals thereafter,
check all fasteners and the complete control system for security and
integrity.
DANGER
Loosening or loss of one or more fasteners may cause failure of the
control system and could cause property damage, injury, or death.
2. Keep all moving parts free from build-up of salt and other foreign
material. This will affect their operation and create control problems.
3. Periodically inspect for corrosion. Any parts affected by corrosion
must be replaced. Any replacement hardware must be as originally
supplied (i.e. similar material and locking features).
4. Periodically inspect control cables for cracks and other damage. If
any is found the cable must be replaced.
5. If cable is stiff in operation, it is unsafe to use and must be
replaced immediately.
6. Periodically treat exposed metal components with a marine
grade wax.
DANGER
DO NOT cover cracks with tape or other sealants. This will create a
hazard in which the cable can fail suddenly without warning,
resulting in property damage, injury, or death.
Boat builder and boat dealer, please supply these Installation
Instructions and Owner’s Manual with the delivery of boat. Boat owner
keep these instructions with your boat for future reference. Boat owner
consult with your boat builder, boat dealer, or SeaStar Solutions if you
have any questions regarding these instructions.
NOTICE
web: www.seastarsolutions.com
SeaStar Solutions 640 North Lewis Road, Limerick, PA 19468 USA
Page 17 of 20
