6
Downrod
Clip
Set Screw
Yoke
Downrod
Pin
Downrod
Tab
Slot
Downrod
Mounting
Bracket
ASSEMBLY INSTRUCTIONS
7
8
5
6
6. Feed the wires coming from the yoke through the
canopy and downrod.
7. Insert the downrod into the yoke and reinstall the
downrod pin and downrod clip. Then retighten the two
set screws.
Note:
With wiring extending out of the downrod,
measure 8 inches of lead wire and cut the excess wire with
wire cutters (not included). Then strip 1/2” of insulation
from the end of each wire.
8. Lift the downrod into the mounting bracket. Rotate the
downrod until the tab in the mounting bracket is seated in
the slot in the downrod ball.
WARNING:
The fan and/or downrod should
not rotate in the mounting bracket if installed
correctly. Failure to align the slot in the downrod ball with
the tab may result in fan falling causing serious injury or
death.
Downrod
Canopy
Downrod Pin
Yoke
Downrod
Downrod Clip
Set Screw
Yoke
5.
DOWNROD MOUNT
- Remove the downrod pin and
downrod clip from the downrod. Then, loosen but don’t
remove the two set screws at the top of the yoke.