Closemount Screw
Canopy
Hook
Mounting
Bracket
Mounting
Bracket Screw
5
ASSEMBLY INSTRUCTIONS
2
1. Turn OFF the electrical power at the main fuse or circuit
breaker.
2. Remove the mounting bracket by removing the two
mounting bracket screws from the round holes in the
canopy. Then loosen the other two mounting bracket
screws from the J-shaped slots. Retain the mounting
bracket screws for later. Install the mounting bracket
to the outlet box (not included) using the screws and
washers provided with the outlet box.
Warning:
To reduce the risk of fire electric shock,
or personal injury, mount to the outlet box marked
“acceptable for fan support” and use the mounting
screws and washers provided with the outlet box.
4
4.
CLOSEMOUNT INSTALLATION
(OPTIONAL)
a. Remove the three Phillips head closemount screws from
the top of the motor assembly.
b. Remove the canopy cover from the bottom of the
canopy.
c. Align the holes in the bottom of the canopy with the
screw holes in the top of the motor housing. The larger
holes in the canopy will encompass the three pre-installed
screws.
d. Secure the canopy to the top of the motor housing with
the closemount screws.
e. Hang the fan on the hook of the mounting bracket.
Proceed to Step 9.
3. Remove the four motor blocks and eight motor screws
from the underside of the motor. Discard the motor
blocks, but keep the motor screws for installation of the
blade arms.
Motor Screws
Motor Block
3
1