background image

This is the safety alert symbol. When you see this

symbol on your pump or in this manual, look for one

of the following signal words and be alert to the potential
for personal injury:

warns about hazards that will cause serious

personal injury, death or major property damage if
ignored.

warns about hazards that will or can cause

serious personal injury, death or major property damage if
ignored.

warns about hazards that will or can cause

minor personal injury or property damage if ignored.
The label NOTICE indicates special instructions which are
important but not related to hazards.
Carefully read and follow all safety instructions in this
manual and on pump.
Keep safety labels in good condition. 
Replace missing or damaged safety labels.

General Safety

Relief valve must be capable of passing full pump flow at
75 PSI.Pump water only with this pump.
Periodically inspect pump and system components.
Wear safety glasses at all times when working on pumps.

Keep work area clean, uncluttered and properly lighted;
store properly all unused tools and equipment.
Keep visitors at a safe distance from the work areas.

Hazardous Pressure! Pump body may

explode if used as a booster pump unless relief valve
capable of passing full pump flow at 75 PSI is installed.
Do not allow pump, pressure tank, piping, or any other
system component containing water to freeze. Freezing
may damage system, leading to injury or flooding.
Allowing pump or system components to freeze will void
warranty.

Electrical Safety

Wire motor for correct

voltage. See “Electrical”
section of this manual and
motor nameplate.

Ground motor before

connecting to power supply.

Meet National Electrical

Code and local codes for all
wiring.

Follow wiring

instructions in this manual
when connecting motor to
power lines.

Make workshops childproof;
use padlocks and master
switches; remove starter keys.

MADE IN U.S.A. OF U.S. AND FOREIGN COMPONENTS
Sold by Sears, Roebuck and Co., Chicago, IL 60684

2

FULL ONE YEAR WARRANTY ON  SHALLOW WELL JET PUMPS

For one year from the date of purchase, Sears will repair or replace this well pump, free of charge, if defective in materials or

workmanship.

LIMITED WARRANTY ON SEARS HYDRO-GLASS

®

WELL PUMPS

After one year and through two years from the date of purchase, Sears will furnish, free of charge, a replacement part for any

defective part. You pay for labor.

LIMITED WARRANTY ON CRAFTSMAN HYDRO-GLASS

®

WELL PUMPS

After one year and through three years from the date of purchase, Sears will furnish, free of charge, a replacement part for any

defective part. You pay for labor.
This warranty does not cover repairs on replacement parts necessary because of abuse or negligence including failure to install,

adjust and operate this well pump according to the instructions in the owner’s manual.

LIMITATION OF LIABILITY

SEARS WILL NOT BE LIABLE FOR LOSS OR DAMAGE TO PROPERTY OR ANY INCIDENTAL OR CONSEQUENTIAL LOSS OR

EXPENSE FROM PROPERTY DAMAGE DUE DIRECTLY OR INDIRECTLY FROM THE USE OF THIS PRODUCT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion

may not apply to you.
WARRANTY SERVICE IS AVAILABLE BY SIMPLY CONTACTING THE NEAREST SEARS SERVICE CENTER/DEPARTMENT IN THE

UNITED STATES. This warranty applies only while the product is in use in the United States.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co., Dept. 817 WA, Hoffman Estates, IL 60179

WARNING

Hazardous voltage.
Can shock, burn, or
cause death.

Ground pump before
connecting to power
supply.

WARNING

Hazardous pressure!
Install pressure relief
valve in discharge pipe.

Release all pressure on
system before working on
any component.

READ AND FOLLOW  SAFETY INSTRUCTIONS!

Summary of Contents for HYDRO-GLASS 390.250290









Reviews: