ASSEMBL
Y
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
BEFORE
YOU
BEGIN
ELLIPTICAL OPERA
TION
LIMITED WARRANTY
TROUBLESHOOTING &
MAINTENANCE
CONDITIONING GUIDELINES
ASSEMBL
Y
ASSEMBL
Y
ASSEMBLY
IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!
There are several areas during the assembly process of an elliptical that special attention must be paid.
It is very important to follow the assembly instructions correctly and to make sure all parts are firmly
tightened. If the assembly instructions are not followed correctly, the elliptical could have frame parts that
are not tightened and will seem loose and may cause irritating noises. To prevent damage to the elliptical,
the assembly instructions must be reviewed and corrective actions should be taken.
UNPACKING
Unpack the product where you will be using it. Place the product on a level flat surface. It is recommended
that you place a protective covering on your floor. During each assembly step, ensure that ALL nuts and
bolts are in place and partially threaded in before completely tightening any ONE bolt.
NOTE:
A light application of grease may aid in the installation of hardware. Any grease, such as lithium
bike grease is recommended.
Before proceeding, find your elliptical’s serial number
located under the console mast boot and enter it in
the space provided below. Also locate the model name
which is located on the side cover.
ENTER YOUR SERIAL NUMBER AND
MODEL NAME IN THE BOxES BELOW:
SERIAL NUMBER :
MODEL NAME:
* Refer to the SERIAL NUMBER and MODEL NAME when calling for service.
* Also enter this serial number on your Warranty Card.
SERIAL NUMBER
IS LOCATED UNDER
CONSOLE MAST BOOT
WARNING
IMPORT
ANT
PRECAUTIONS
Summary of Contents for Fitness gear 821E
Page 1: ...ELLIPTICAL USER S GUIDE FOR MODEL 821E...
Page 2: ......
