21
Attaching the Leg Lever to the Low Pulley
Station
To use the Leg Lever (29), the seat must be attached to
the Butterfly upright (see ATTACHING AND REMOVING
THE BUTTERFLY SEAT on page 20).
Attach one end of the Chain (52) to the Medium Cable
(86) with a Cable Clip (53). Attach the other end of the
Chain to the Eyebolt (35) with a Cable Clip. Always
remove the Chain (52) from the Eyebolt (35) before
removing the seat.
29
53
52
35
86
Attaching the Lat Bar or Nylon Strap to the
Low Pulley Station
Attach the Lat Bar (54) to the Medium Cable (86) with a
Cable Clip (53). For some exercises, the Chain (52)
should be attached between the Lat Bar and the Long
Cable with two Cable Clips. Adjust the length of the
Chain between the Lat Bar and the Long Cable so the
Lat Bar is in the correct starting position for the exer-
cise to be performed.
The Nylon Strap (39) can be attached in the same
manner.
54
86
52
53
39
Adjusting the Position of the Foot Plate
To adjust the position of the foot plate, pull out the Small
Lock Pin (90). Move the Adjustment Tube (88) to the
desired position and re-insert the Lock Pin.
88
90
