AG3000 INSTRUCTIONS
Seametrics • 253.872.0284
Page 20 seametrics.com
OPERATION
Standard Menu Options
The EXIT tab in the MAIN MENU has a second function. If,
instead of using the hold and tap sequence to return to the
HOME screen, you tap
five times, you will be redirected
to a SUBMENU screen from which you can access several
more options.
Navigation in this SUBMENU is the same as for the MAIN
MENU. Whenever you wish, go to the EXIT tab in the
SUBMENU and perform the hold and tap sequence to
return to the MAIN MENU.
Sub-Menu
INFO
COMM MBID
FL DIR
SAMP
HPOLL
FOUT
EXIT
PRESS + TO VIEW INFO
ABOUT METER
INFO: Meter model number, serial number, and firmware
version.
COMM: Modbus
®
baud rate and parity.
(Not available on
battery only units.)
MBID: Modbus
®
address
(Not available on battery only
units.)
SAMP: Sample rate
(Battery powered version only.)
HPOLL: HART Address
(Not available on battery only
units.)
EXIT: Return to MAIN MENU or enter next submenu.
INFO
COMM MBID FL DIR
SAMP HPOLL FOUT
EXIT
SAMP
PRESS + TO VIEW INFO
ABOUT METER
Sub-Menu - Battery Only Version
T UNIT
View or change TOTAL
volume units
R UNIT
View or change flow
RATE units
SET P
View or change pulse
output scaling
DAMP
View or change # of
seconds for rolling
average.*
(0=1 second,
1=2 seconds, etc.)
T UNIT
R UNIT SET P DAMP
SET 4 SET 20 SET F
EXIT
TOTAL = GALLONS
PRESS + TO SET TOTAL
UNITS FOR DISPLAY
T UNIT
R UNIT
SET P DAMP
SET 4 SET 20 SET F
EXIT
FLOW RATE = GALLONS/MIN
PRESS + TO SET RATE
UNITS FOR DISPLAY
T UNIT R UNIT
SET P
DAMP
SET 4 SET 20 SET F
EXIT
00001.0
GALLONS
PRESS + TO SET
GALLONS TOTALIZED PER
PULSE SENT OUT PULSE1
T UNIT
R UNIT SET P
DAMP
SET 4 SET 20 SET F
EXIT
DAMPING = 1
PRESS + TO SET
DAMPING VALUE
SET 4
View or change flow
rate corresponding
to 4mA.
(Externally
powered units only)
SET 20
View or change flow
rate corresponding
to 20mA.
(Externally
powered units only)
SET F
View or change high
frequency output
scaling.
(Externally
powered units only)
EXIT
Return to HOME
SCREEN or enter
SUBMENU
T UNIT R UNIT SET P DAMP
SET 4
SET 20 SET F
EXIT
00040.0
GALLONS/MIN
PRESS + TO SET FLOW
RATE AT WHICH 4mA
(MIN) OUTPUT IS DESIRED
T UNIT R UNIT SET P DAMP
SET 4
SET 20
SET F
EXIT
00200.0
GALLONS/MIN
PRESS + TO SET FLOW
RATE AT WHICH 20mA
(MAX) OUTPUT IS DESIRED
T UNIT
R UNIT SET P DAMP
SET 4 SET 20
SET F
EXIT
FMAX = 1 KHz
PRESS + TO SET
MAX FOUT
T UNIT
R UNIT SET P DAMP
SET 4 SET 20 SET F
EXIT
PRESS + EXIT MENU
AND RETURN TO FLOW
DISPLAY
Note: Available options will depend on specific meter configuration. Not all options are available on all meters.
Options not ordered with your meter will not appear on the meter menu.
Special SUBMENU for Further Options
* See DAMP Settings for Battery Units on 22.
