- 27 -
damage to the equipment and even endanger the safety of the
operator. Therefore must strictly abide the following:
1
、
No directly fan or other blowing air to the station when working,
otherwise it may cause damage to the equipment or components as
the distortion of heater thermometric;
2
、
prohibited flammable gases or liquid around the machine; After
booting, forbidden combustibles touch high temperature district and
peripheral metal parts, otherwise it will easily cause fire or explosion;
3
、
To avoid high temperature scald, forbidden touching high temperature
fever zone during working. PCB board still warm when completed,
operation process should take necessary protective measures;
4)
、
PCB board should be placed on V type support shelves and used slider
pairs to support PCB board in the centre; e. Metal or angular and
sharp objects are avoided on touch screen surface;
5)
、
upper and lower heater inlet must not be blocked, otherwise heating
wire will be damaged;
6)
、
After work, please guarantee natural cooling for 5 minutes, then
Switch off;
7)
、
if metal objects or liquid fall into rework station during working, you
should power off immediately, unplug power plug, until it cooled,
then eradicate litter and dirt; it will be influenced if grease on the
heating panels and accompanied by odor when rebooting. Please
