Sealy Ease, Owner'S Manual

Page: 15 / 44

13
A Sync Cord is included with the base. Not available on Queen, Full or King/Cal King size bases.
The Sync Cord connects the two control boxes to a single remote for the synchronization of two bases.
Disconnect the Battery Backup Box cable from each Control Box or
splitter cable. Make note where the cable was plugged in.
Plug bases back into the power source.
If bases become mismatched, pressing the FLAT button will re-sync the
mechanical positions.
Connect the male end of each Sync Cord to Control Box or splitter
cable. Insert it into the same port that you disconnected the Battery
Backup Box from in Step 2.
Check to ensure all cords are securely attached. Both remotes will now
operate both bases simultaneously.
Unplug bases from power source.
Connect each Battery Backup Box male connection to the sync cord
female connection (Refer to illustration at right).
STEP 3
STEP 6
STEP 2
STEP 5
STEP 1
STEP 4
PERFORMANCE NOTES
syncing two bases (optional)
Battery
Backup Box 1
Sync Cord
Battery
Backup Box 2
Control Box 1 Control Box 2
The system is now linked. Buttons pressed on either remote
will control both bases simultaneously.