![Seals TS3 User Manual Download Page 13](http://html.mh-extra.com/html/seals/ts3/ts3_user-manual_1227849013.webp)
9
Removal of Micro SD Card
Take out the Micro SD card (for operation, please refer to “
Installation of Micro SD Card
”).
1.6 Battery Charging
Warning: The battery, charger and accessories used should be special for this model of mobile phone. The use of other types of battery, charger or
accessories may affect acknowledgement of the mobile phone or violate the warranty terms and conditions, and may lead to dangers. Do not put the
battery in a place where it is too hot or too cold. Please put the battery in a place out of the reach of children.
Insert the charger plug into a 220V AC socket.
Insert the adapter of the charger into the interface slot at the top of the mobile phone.
If the mobile phone is charged when it is powered on, the battery level icon on the screen will show a flashing charging status, indicating the
mobile phone is being charged. If the mobile phone is charged when it is powered off, the charging status will be shown on the screen.
After the battery is fully charged, the flashing icon at the battery icon on the status bar will disappear, and now you can disconnect the adapter of
the charger from the mobile phone interface.
Note:
The only way to stop charging after charging begins is to disconnect the charger. Please use a power socket convenient for plugging whenever possible.