Sealite SL-PEL Series Installation Manual Download

Page: 54 / 58

Latest products and information available at www.sealite.com

SL-PEL Series

Sectored Port Entry Light

Trouble Shooting

Problem

Remedy

Unable to communicate with

PEL via USB

1. Connect the USB drive provided by Sealite and open to view files.

2. Double-click on folder: PELConfigx.xx (note, version number may vary)

3. Double-click on folder: USBDriversForWindows

4. Double-click on folder: Executable

5. Double-click on file: CDM V2.10.00 WHQL Certified.exe

6. Extract the executable file

7. A computer restart may be necessary

8. Ensure USB Drivers have been installed correctly.

9. Continue with USB → PEL connection

Low battery voltage

• Check voltage across PINs G and H and ensure it they match values

recorded in the programme

• Repeat the process after covering the solar array to see if the battery

voltage changes

• Check all solar and battery connections.

PE cell abnormality • Check PE window is clear and clean

• Cover PE cell and lens as previously described and observe change of

state in the “AIS Report” tab

• Change the Mode from “Day and Night” to “Night only” and repeat

process observing change of intensity or On/off status

Abnormalities with GPS signal • Check cable , plug in connection and position of mounting of the antenna

to ensure nothing has changed on site. Perhaps the antenna is no longer

looking at the sky or is now obscured by any other equipment since

installed

Summary of Contents for SL-PEL Series



























































Search results

Summary of Contents for SL-PEL Series

Reviews:

Related manuals for SL-PEL Series

Brands by name

Popular brands

Sealite SL-PEL Series, Installation Manual

Search results

Summary of Contents for SL-PEL Series

Reviews:

Related manuals for SL-PEL Series

Brands by name

Popular brands