SL-C510
Compact 5-9NM Solar Marine Lantern
Latest products and information available at
www.sealite.com
43
Operational Mode (Advanced users)
The lantern has three modes of operation: Always on, Standby Mode and Dusk-to-Dawn mode. These
modes can be selected either via the IR Remote Control or via the GSM module (if fi tted).
• In Always On mode,
the daylight sensor is disabled, and the lantern will remain ON.
• In Standby mode,
the lantern is turned off and the daylight sensor is disabled. This mode does not
affect the operation of the GSM module.
• In
Dusk-to-Dawn,
the daylight sensor is enabled.
Always on mode
Standby mode
Dusk-to Dawn mode
I
1
B
T/C
T/C
I
2
B
T/C
T/C
I
3
B
T/C
T/C
Hibernation Mode (Advanced users)
For situations where the lantern is put into storage for a known period, the IR Remote Control can be
used to confi gure the lantern into Hibernation Mode for a user programmable date range.
Hibernation Mode maximises conservation of the battery power by disabling the light (will not activate
at night) and shutting off the GPS receiver to rely on the internal clock for date checking. The IR
sensor is still monitored in Hibernation Mode. Power consumption is only improved by physically
disconnecting the battery supply.
Hibernation Mode is defi ned by a start date and end date that are programmed into the lantern via the
IR Remote Control.
Using the IR Remote Control
The lantern must be in Test Mode prior to pressing any of the following key sequences. However,
the lantern will return to Normal Operation if it has not detected a valid key press for a period of 15
seconds. When the lantern exits from Test Mode it will either enter Dusk to Dawn mode, Hibernation
Mode, or Storage Mode, if enabled.
L
I