manualshive.com logo in svg

Sealite SL-C510, Installation & Service Manual, Page: 38 / 63

Share
Download
Sealite SL-C510 Installation & Service Manual Download Page 38

38

Optional IR Remote Control

The IR programmer is used to communicate with Sealite lighting products that 
have an IR sensor fi tted. The remote control is used for the following functions:

•    Flash Code

: Read the current fl ash code, confi gure a new fl ash code.

•    Lamp Intensity

:

 

Read the current lamp intensity, confi gure a new intensity 

level.

•    Ambient Light Thresholds

:

 

Read the current light thresholds, confi gure 

new ambient light thresholds.

•    Perform a battery health check

.

On receiving a valid key signal from the IR Programmer, the light will fl ash 
once. 

The user should wait until the light responds to each keypress before pressing 
another key. If there is no response to the keypress after 3 seconds, it has not 
been detected by the light and the key can be pressed again.

If an invalid key is detected, the light will fl ash quickly 5 times. In this case, the 
command will have to be restarted.

T/C

T/C

Read

Lux

Flash Code

Intensity

Battery Status

Test / Configure

R

L

FC

I

B

3

4

5

6

7

8

9

0

1

2

Summary of Contents for SL-C510
































































Reviews:

No comments