manualshive.com logo in svg

Sealite SL-C510, Installation & Service Manual, Page: 17 / 63

Share
Download
Sealite SL-C510 Installation & Service Manual Download Page 17

SL-C510

Compact 5-9NM Solar Marine Lantern

Latest products and information available at 

www.sealite.com

17

SealitePro

®

 Password Reset Procedure

In the event where the password set is unknown the procedure below should be followed:

Step 1 – Disconnect the power supply from the light head:

(a).  Remove the four socket-head screws on the top of the lens assembly and lift the SL-C510 (lantern   

     head) assembly from the solar chassis.

(b).  Disconnect the 4-Pin connector that joins the battery to the light head, then immediately re-connect 

     the battery and the lantern again. 

Step 2 – Connect to the lantern using the SealitePro

®

:

Once the light head and battery are re-connected ensure the following procedure is conducted within one 
minute. Otherwise the process at step 1 will need to be completed.

(a).  Connect to a lantern by pressing “Connect via Bluetooth

®

”

(b).  Select a lantern displayed on the “Connect via Bluetooth” screen.

Where examples are identifi ed side by side, the left is applicable to Android

®

 devices and  the right 

image to iOS devices.

Summary of Contents for SL-C510
































































Reviews:

No comments