SL-BR-DC
Up to 4NM Bridge Light - DC Model
Latest products and information available at
www.sealite.com
11
Maintenance & Servicing
Optional GSM Monitoring & Control System
Designed to be maintenance free the Bridge Lights require minimal attention, though the following
maintenance and servicing information is provided to help ensure the life of your Sealite product.
•
Occasional cleaning of the dome lens may be required using a cloth and warm soapy water.
Trouble Shooting
The light is also available with GSM Cell-Phone Monitoring and Control – enabling users to access real-
time diagnostics data and change lantern settings via cell-phone. The system can also be configured
to send out alarm SMS text messages to designated cellular telephone numbers. users can also have
alarms and reports sent to designated email addresses.
Please contact Sealite for further information and instructions.
Problem
Remedy
Lantern will not activate.
• Ensure lantern is in darkness.
• Wait at least 60 seconds for the program to initialise in darkness.
• Ensure battery terminals and light head are properly connected.
• Ensure battery voltage is above 12 volts.
Lantern will not operate for
the entire night.
• Expose lantern to direct sunlight and monitor operation for
several days. Sealite products typically require 2.5 hours of direct
sunlight per day to retain full autonomy. From a discharged state,
the lantern may require several days of operational conditions to
‘cycle’ up to full autonomy.
• Ensure solar module is clean and not covered by shading during
the day.
Sealite LED Light Warranty
Refer to Sealite website:
