background image

Latest products and information available at www.sealite.com

20

Radio Controller

Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor.  

Sealite products are subject to certain Australian and worldwide patent applications. 

authorised Sealite repair personnel. 

3.  The customer must give Sealite Pty Ltd notice of any defect with the product within 30 days of the 

customer becoming aware of the defect.  

4.  Rechargeable batteries have a limited number of charge cycles and may eventually need to be replaced. 

Typical battery replacement period is 3-4 years. Long term exposure to high temperatures will shorten the 

battery life. Batteries used or stored in a manner inconsistent with the manufacturer’s specifications and 

instructions shall not be covered by this warranty.

5.  No modifications to the original specifications determined by Sealite shall be made without written 

approval of Sealite Pty Ltd.

6.  Sealite lights can be fitted with 3rd party power supplies and accessories but are covered by the 3rd party 

warranty terms and conditions. 

7.  The product must be packed and returned to Sealite Pty Ltd by the customer at his or her sole expense. 

Sealite Pty Ltd will pay return freight of its choice. A returned product must be accompanied by a written 
description of the defect and a photocopy of the original purchase receipt. This receipt must clearly list 
model and serial number, the date of purchase, the name and address of the purchaser and authorised 
dealer and the price paid by the purchaser. On receipt of the product, Sealite Pty Ltd will assess the 
product and advise the customer as to whether the claimed defect is covered by this warranty.

8.  Sealite Pty Ltd reserves the right to modify the design of any product without obligation to purchasers of 

previously manufactured products and to change the prices or specifications of any product without notice 

or obligation to any person. 

9.  Input voltage shall not exceed those recommended for the product.
10.  Warranty does not cover damage caused by the incorrect replacement of battery in solar lantern models.

11.  This warranty does not cover any damage or defect caused to any product as a result of water flooding or 

any other acts of nature.

12. There are no representations or warranties of any kind by Sealite or any other person who is an agent, 

employee, or other representative or affiliate of Sealite, express or implied, with respect to condition of 

performance of any product, their merchantability, or fitness for a particular purpose, or with respect to any 

other matter relating to any products. 

Limitation of Liability

To the extent permitted by acts and regulations applicable in the country of manufacture, the liability of Sealite 
Pty Ltd under this Warranty will be, at the option of Sealite Pty Ltd, limited to either the replacement or repair of 
any defective product covered by this Warranty.  Sealite will not be liable to Buyer for consequential damages 

resulting from any defect or deficiencies.  

Limited to Original Purchaser 

This Warranty is for the sole benefit of the original purchaser of the covered product and shall not extend to 

any subsequent purchaser of the product. 

Miscellaneous

Apart from the specific warranties provided under this warranty, all other express or implied warranties relating 

to the above product is hereby excluded to the fullest extent allowable under law. The warranty does not 

extend to any lost profits, loss of good will or any indirect, incidental or consequential costs or damages or 

losses incurred by the purchaser as a result of any defect with the covered product.  

Warrantor

Sealite Pty Ltd has authorised distribution in many countries of the world. In each country, the authorised 
importing distributor has accepted the responsibility for warranty of products sold by distributor. Warranty 
service should normally be obtained from the importing distributor from whom you purchased your product. In 

the event of service required beyond the capability of the importer, Sealite Pty Ltd will fulfil the conditions of 

the warranty. Such product must be returned at the owner’s expense to the Sealite Pty Ltd factory, together 
with a photocopy of the bill of sale for that product, a detailed description of the problem, and any information 
necessary for return shipment. 

Summary of Contents for Radio Controller System























Reviews: