GSM Cell-Phone
Monitoring & Control System
Latest products and information available at
www.sealite.com
19
The add Command
The “add” command allows;
• Cell phone numbers to be added to the ‘access’ and ‘report’ lists and;
• Required alarms and autoreports to be enabled.
Only users listed in the Access List are able to use the “add” commands
Full cell phone numbers including ‘+’ and country code must be used when adding cell phone
numbers to the ‘access’, ‘report’ & ‘web’ lists.
To add the cell phone number 0402123456 to the ‘report’ list the following command would be sent in
an SMS text message from any cell phone number listed in the access list:
“add 61402123456”
A successful update would result in an SMS text message reply:
“Report List
+61402123456”
To add a low battery alarm trigger the following command would be sent in an SMS text message from
an authorised cell phone:
“add alarm batlo”
A successful update would result in an SMS text message reply:
“Alarm Added
Low Battery
No Lantern Data
No GPS Data
Web”
4. Via Sealite GSM Web Portal
To configure your GSM lantern to send daily reports or alarms to Sealite’s secure online GSM Web Portal
the following messages MUST be sent via SMS text message to your lantern:
“add alarm web”
Then send the SMS text message:
“add autoreport web”
