14
Creating Individual Alarms to be sent to the Cell Phone Report List
Specific alarms can be created and sent as an SMS text message to cell phones listed in the Report List.
The following process will enable desired alarms;
• An example of an actual alarm SMS text
message would be:
add alarm batlo
• This sets the low battery alarm. No cell
phone number is required following the
SMS text message
• A successful update of the above example
would result in a reply SMS text message:
Added Alarm
Low Battery
A successful update will result in an SMS text
message reply:-
Alarm Added
(list of all alarms currently setup)
Use a cell phone in the access list to
enable desired alarms by sending the SMS text
message:-
add alarm (alarm parameter)
More than 1 alarm can be included in the SMS
text message. To do this separate each alarm
parameter with a ‘space’ character.
A typical response SMS text message report message from a lantern when alarms are set up will
display as below:
------------------------------------------
Alarm Added
Low Battery
Web Report
------------------------------------------
Note: The actual layout of the message is dependent on your cell phone screen.
Once an alarm condition has occurred/been triggered an SMS text message will be sent
reporting the alarm to all cell phone numbers listed in the “Report List” and/or to the email
addresses listed in the enabled “Alarm Emailing List” from the Sealite GSM Web Portal. Alarm
conditions will continue to be reported once every 24 hours. This is to prevent constant
reporting of the same alarm or multiple alarms. The lantern can still be accessed by requesting
a report via SMS text message.
