Sealife Micro 3.0, Instruction Manual

Page: 40 / 84

38
Capture mode - Applies to Photos only
The capture mode sets the quantity of photos captured when pushing
the shutter button. One of the following icons is shown on the LCD
display. Select from 5 options:
A. B. C. D. E.
A. Single – Push and release the shutter button to capture one photo.
B. Continuous – Push and hold the shutter button to capture multiple
photos at a rate of 10 frames for the first second and 2 photos per
second, thereafter.
C. Time Lapse – Push and release the shutter button to record a series
photos at pre-set time intervals of 2 sec, 5 sec, 10 sec, 30 sec, 1
min, 5 min and 30 min. Useful for shooting a sequence of pictures
without holding the camera or disturbing the subject. Later, you can
select the best image or combine all the images into a time lapse
video using video editing software. After setting the capture mode to
Time Lapse, go to the Photo Time Lapse setting to select the
desired shooting interval. See Photo Time Lapse setting below for
more details.