Sealife Micro 3.0, Instruction Manual

Page: 77 / 84

75
FCC and can be found under the Display Grant section of
www.fcc.gov/eot/ea/fccid after searching on FCC ID: 2AAD3AA2G1J1
End Product Labeling
This transmitter module is authorized only for use in device where the
antenna may be installed such that 20cm may be maintained between
the antenna and users. The final end product must be labeled in a visible
area with the following: "Contains FCC ID: 2AAD3AA2G1J1 ” and
"Contains IC: 10290A-AA2G1J1 “
Information for the OEMs and Integrators
The following statement must be included with all versions of this
document supplied to an OEM or integrator, but should not be distributed
to the end user.
1) This device is intended for OEM integrators only.
2) Please see the full Grant of Equipment document for other
restrictions.
IC Statement
(RSS-Gen section 7.1.3)
Canada, Industry Canada (IC) Notices
This device complies with Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.