background image

NOTE: 

It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

iMporTaNT:

 no liability is accepted for incorrect use of this product.

WarraNTy:

 Guarantee is 12 months from purchase date, proof of which will be required for any claim.

environmental protection

recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be 

sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.

When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)

into approved containers and dispose of the product and the fluids according to local regulations.

parts support is available for this product. To obtain a parts listing and/or diagram, 

please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.

YK509f, YK759f.V2 | issue 2 05/03/18

Original Language Version

© Jack sealey limited

7.  MaiNTeNaNce

  

Note: 

maintenance and repair must only be carried out by qualified person. contact your sealey stockist for details.

7.1.    

Always keep the press clean, dry and lubricate all moving parts at regular intervals.

7.2.    

When not in use always store in a dry location with the piston retracted.

7.3.    

should you need to check or replace oil ensure piston is fully retracted. remove the oil reservoir filler plug and top up using sealey    

 

hydraulic jack oil. 

do NoT

 use brake fluid. contact your local sealey stockist for details. After filling purge the system to remove any air.

 

iMporTaNT:

 no resPonsiBilitY is AccePted for incorrect use of tHe Press.

 

Hydraulic products are only repaired by local service agents. We have service/repair agents in all parts of the uK. 

 

do NoT reTurN producT To us.

 Please telephone us on 01284 757500 to obtain the address and phone number of your local  

 

agent. if product is under guarantee please contact your dealer.

   fig.3

   fig.4

sealey Group, Kempson Way, suffolk business park, bury st edmunds, suffolk. ip32 7ar

 01284 757500 

 01284 703534 

 [email protected] 

 www.sealey.co.uk

Summary of Contents for YK509F

Page 1: ...mpress springs or any other item that could disengage and cause a potential hazard 8 8 DO NOT stand directly in front of the loaded press and never leave a loaded press unattended 8 8 DO NOT force the press to achieve a task it was not designed to perform 8 8 DO NOT make any modifications to the press 8 8 DO NOT adjust or tamper with the safety valve 8 8 DO NOT exceed the rated capacity of the pre...

Page 2: ...SS ASSEMBLY use the exploded diagram Fig 2 as a guide to assembly 4 1 1 Remove any loose items from the crate Attach slings around the top cross member using a suitable hoist or gantry lift the framework out of the transportation crate into an upright position 4 1 2 Attach base sections 01 and supports 03 to the left and right posts using bolts 02 washers 06 lock washers 05 and nuts 04 4 1 3 Remov...

Page 3: ...perator or damage to component Ensure you have read and understood chapter 1 safety instructions 6 operation 6 1 Set the bed frame at the desired height if adjustment is required turn the hand winch until the cable just takes the weight of the bed frame remove the safety clips 13 from the back of the pins 12 see Fig 3 and withdraw the pins Use the hand winch to raise or lower the bed frame to the ...

Page 4: ...V2 Issue 2 05 03 18 Original Language Version Jack Sealey Limited 7 maintenance Note Maintenance and repair must only be carried out by qualified person Contact your Sealey stockist for details 7 1 Always keep the press clean dry and lubricate all moving parts at regular intervals 7 2 When not in use always store in a dry location with the piston retracted 7 3 Should you need to check or replace o...

Reviews: