3. specificaTioN
model:.....................................................................YK509f.....................................YK759f.V2
type:...........................................................................floor...............................................floor
capacity:................................................................50tonne..........................................75tonne
ram stroke:............................................................200mm...........................................250mm
ram diameter:..........................................................70mm.............................................93mm
lateral ram travel:.................................................250mm...........................................260mm
maximum Height - ram to table:..........................1042mm...........................................884mm
minimum Height - ram to table:...............................62mm...........................................170mm
table Aperture:.................................................185/235mm....................................251/201mm
Working table depth:..............................................259mm...........................................217mm
Working table Width:..............................................730mm...........................................800mm
overall Height:......................................................1910mm.........................................1925mm
Gauge included:...........................................................Yes.................................................Yes
Weight:.....................................................................300kg.............................................451kg
safety Guard (optional)........................................YKsG50.........................................YKsG75
4. asseMbly
4.1.
YK509f 50ton Press AssemBlY (use the exploded diagram fig.1 as a guide to assembly).
YK759f 75ton Press AssemBlY (use the exploded diagram fig.2 as a guide to assembly).
4.1.1.
remove any loose items from the crate. Attach slings around the top cross member, using a suitable hoist or gantry lift the framework
out of the transportation crate into an upright position.
4.1.2.
Attach base sections (01) and supports (03) to the left and right posts using bolts (02), washers (06), lock washers (05) and nuts (04).
4.1.3.
remove the m12 transportation bolts holding the bed frame to the posts.
4.1.4.
move the winch to the outside of the left hand post and attach using bolts (02), washers (06), lock washers (05) and nuts (04). ensure
that the cables are located correctly in the rollers before fully tightening.
YK509f, YK759f.V2 | issue 2 05/03/18
Original Language Version
© Jack sealey limited
fig.1
