background image

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and 
properly maintained, give you years of trouble free performance.

IMPORTANT:

 

PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

 

             Contents 

 

 

 

 

 

OEM Number

Item 

     

Part 

Number 

Description 

  Ford 

 Volvo 

 Mazda

1         

VSE6160-01-V2       Camshaft Alignment Plate >5-11 

303-1565  

VSE6160-02-V2 

Camshaft Alignment Plate >5-11 

303-1504  

999-7405  

303-1061

VSE6160-03-V2 

Crank 

Sensor 

Alignment 

Tool 

 303-1521 

 999-7416

VSE5042A.10-V2 

Crankshaft 

Timing 

Pin 

 303-748 

 999-7406 

 303-507

VSE6160-04-V2 

Tensioner Pin (Ø2mm) 

 

303-1054 

VSE5042-11-V2 

Camshaft Sprocket Alignment Plate 

303-1097  

999-7429

VSE5850 -V2 

Crankshaft Pulley Alignment Plate 

303-1550         999-7431/999-7415 

VSE6160-05-V2 

Crankshaft 

Pulley 

Alignment 

Plate 

    205-072

VSE6160-06-V2 

Crankshaft 

Pulley 

Alignment 

Tool 

  999-7415

Original Language Version

 VSE6160.V2     Issue:1     06/07/22

 © Jack Sealey Limited

Comprehensive kit covers engines which are fitted to a large range of Ford, Volvo and some Mazda vehicles. Contains time-saving tooling to correctly align 

the timing covers on Ford and Volvo engines, and a crankshaft pulley holder for Mazda engines. Supplied in storage case with instructions and warning tag.

TIMING TOOL KIT - FOR FORD, MAZDA, VOLVO 1.5, 
1.6, 2.0 - BELT/CHAIN DRIVE

MODEL NO:

 VSE6160.V2

 1.  SAFETY

 2.  INTRODUCTION

 3.  CONTENTS

IMPORTANT! 

These instructions are provided as a guide only. Always refer to the vehicle manufacturer’s service instructions

or a proprietary manual to establish the correct procedure and data. 

 

‰

WARNING! 

Wear approved eye protection. Wear appropriate Personal Protective Equipment. A full range of Personal Protective Equipment 

is available from your Sealey stockist.

 

‰

WARNING! 

Ensure that Health & Safety, Local Authority Regulations and general workshop practice Regulations are adhered to when using 

tools.

 

‰

WARNING! 

Incorrect or out of phase camshaft timing can result in contact between the valve head and the piston crown causing damage to engine.

 

‰

WARNING! 

The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations. The Operator / user 

must apply caution and common sense (good practical sense).

 

8

DO NOT 

use tools if damaged.

 

8

DO NOT 

attempt to start or move a vehicle whilst in gear and with timing devices fitted. 

 

9

Wear suitable clothing to avoid snagging. 

DO NOT 

wear jewellery. Tie back long hair. 

 

9

Ensure that a vehicle that has been raised by a jack is adequately supported. Use axle stands.

 

9

When timing an engine, always prevent the engine from being turned over. Use a notice and / or inhibit the engine.

 

9

Keep children and unauthorised persons away from the work area.

 

9

Maintain tools to ensure that they are in an adequate condition for safe use and optimum performance.

 

9

Account for all tools, parts and components being used. 

DO NOT 

leave these in or near the engine. 

 

9

Return tools to suitable storage after use.

 

9

When not in use, store in a safe, dry childproof place.

Refer to 

instruction

manual

Wear eye

protection

Reviews: