5. OPERATION
Refer to fig.2
5.1.
Squeeze trigger to apply pressure on the calliper piston.
5.2.
When applying pressure on the piston turn the wind back handle to rotate and compress the piston; the handle can be turned
either way depending on the design of the calliper.
5.3.
Push the pressure release button to retract the tool.
6. MAINTENANCE
6.1.
Lubricate the tool daily with a few drops of Sealey air tool oil dripped into the air inlet. Lightly oiling the wind back shaft will prolong the
life of the tool.
6.2.
After use clean the tool with a damp cloth and mild detergent to remove any dirt and grime.
6.3.
When you are finished with the tool store it in a dry, safe, childproof location.
.
Original Language Version
© Jack Sealey Limited
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
V
S0286 Issue:3 (H,F) 16/11/20
