background image

SUPERMIG150.V2  

SUPERMIG160.V2   

SUPERMIG180.V2

MODEL No's:

Environmental Protection.

 

Recycle unwanted materials instead of disposing of them as waste. All tools,  

 

accessories and packaging should be sorted, taken to a recycle centre and 

 

disposed of in a manner which is compatible with the environment.

 

When the product is no longer required, it must be disposed of in  

 

 

an environmentally protective way. 

NOTE:

 It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: 

No liability is accepted for incorrect use of this product. 

WARRANTY: 

Guarantee is 12 months from purchase date, proof of which will be required for any claim. 

INFORMATION:

 For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

01284 757500

01284 703534

[email protected]

Sole UK distributor, Sealey Group, 

Kempson Way, Suffolk Business Park

Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

Web

email

Original Language Version

SUPERMIG150.V2, SUPERMIG160.V2, SUPERMIG180.V2    Issue: 3 - 09/04/10

Summary of Contents for SUPERMIG150.V2







Reviews: