5. MAiNteNANce
wArNiNG!
disconnect polisher from power supply before changing accessories, servicing or performing maintenance. Replace or repair
any damaged parts. Use genuine parts only, unauthorised parts may be dangerous and will invalidate the warranty.
5.1.
After each 50 hours use (or as required), remove dust by blowing air through the side vents and around the pad bearing. Regular
cleaning will prolong the life of the polisher.
5.2.
Change pads when required. ensure pad and disc RPm ratings are equal to, or exceed the machine rating. If the disc becomes
unbalanced, it will cause the bearings to wear.
5.3.
When not in use store in a safe, dry, childproof location.
5.4.
All other service and maintenance be carried out by an authorised Sealey stockist.
Original Language Version
© Jack Sealey limited
sealey Group, kempson way, suffolk Business park, Bury st edmunds, suffolk. ip32 7Ar
01284 757500
01284 703534
www.sealey.co.uk
eNviroNMeNt protectioN
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important
: no liability is accepted for incorrect use of this product.
warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
S
PK600 Issue:2 (3,F) 17/07/19
weee reGulAtioNs
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
