Sealey SA630, Instructions

Page: 1 / 2

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE OR PERSONAL INJURY AND WILL INVALIDATE THE
WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
3
Follow all workshop safety rules, regulations, and conditions when using wrench.
p
WARNING! Disconnect from air supply before changing accessories or servicing.
3
Maintain the wrench in good condition and replace any damaged or worn parts. Use
genuine parts only. Non-authorised parts may be dangerous and will invalidate the warranty.
p
WARNING! Check correct air pressure is maintained and not exceeded. We recommend 90psi.
3
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each
use and ensure that all connections are secure.
3
Wear approved safety eye/face shield, ear defenders, and hand protection.
3
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
3
Keep children and non essential persons away from the working area.
7
DO NOT use the wrench for a task it is not designed to perform.
p
WARNING! DO NOT use wrench if damaged or thought to be faulty. (Contact Service Agent).
7
DO NOT use wrench unless you have been instructed in its use by a qualified person.
7
DO NOT carry the wrench by the air hose, or yank the hose from the air supply.
7
DO NOT operate wrench if you are tired, under the influence of alcohol, drugs or intoxicating medication.
7
DO NOT carry wrench with your hand on the power trigger in order to avoid unintentional starting.
7
DO NOT direct air from the air hose at yourself or others.
3
When not in use disconnect from air supply and store in a safe, dry, childproof location.
SA630 SA631 - 0016 - (3) -260601
INSTRUCTIONS FOR
MINI AIR RATCHET WRENCH
Models:
SA630 & SA631
01284 757500
E-mail:
sales@sealey.co.uk 01284 703534
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice. IMPORTANT: No liability is accepted for incorrect use of this equipment. WARRANTY: See note in
introduction. Guarantee is 12 months from purchase date. proof of which will be required for any claim. INFORMATION: Call us for a
copy of our latest catalogue and promotions on 01284 757525 and leave your full name and address including your postcode.
Sole UK Distributor, Sealey Group , Bury St. Edmunds, Suffolk.
2. INTRODUCTION & SPECIFICATIONS
MODEL . . . . . . . . . . . . . . . . . .SA630
Drive size . . . . . . . . . . . . . . . . .1/4”Sq
Max torque . . . . . . . . . . . . . . . . 30ft/lb
Air consumption . . . . . . . . . . . . . 5cfm
Operating pressure . . . . . . . . . . .90psi
Air inlet size . . . . . . . . . . . . . .1/4” BSP
Weight . . . . . . . . . . . . . . . . . . . 0.5kg
MODEL . . . . . . . . . . . . . . . . . .SA631
Drive size . . . . . . . . . . . . . . . . .3/8”Sq
Max torque . . . . . . . . . . . . . . . . 30ft/lb
Air consumption . . . . . . . . . . . . . 5cfm
Operating pressure . . . . . . . . . . .90psi
Air inlet size . . . . . . . . . . . . . .1/4” BSP
Weight . . . . . . . . . . . . . . . . . . . . 0.5kg
Mini air wrench suitable for applications where space is at a premium. Superb for engine bay work
on cars, CVs, motorcycles and outboards. Compact design utilises high quality bearings and rotor
end plates for smooth power output. Rear exhaust with baffle reduces noise and oil spray. Fitted with
protective rubber ratchet head boot.
Item SA630 SA631 Description
Part No Part No
Item SA630 SA631 Description
Part No Part No
Issue Date: 010700
Issue No: 3
Date Modified: 260601
1 SA630/01 SA631/01 AIR INLET BUSHING
2 SA630/02 SA631/02 REGULATOR
3 SA630/03 SA631/03 O-RING
4 SA630/04 SA631/04 VALVE SPRING
5 SA630/05 SA631/05 THROTTLE VALVE
6 SA630/06 SA631/06 O-RING
7 SA630/07 SA631/07 VALVE PLUNGER
8 SA630/08 SA631/08 MOTOR HOUSING
9 SA630/09 SA631/09 PIN
10 SA630/10 SA631/10 LEVER PIN
11 SA630/11 SA631/11 THROTTLE LEVER
12 SA630/12 SA631/12 BALL BEARING ( B696ZZ )
13 SA630/13 SA631/13 REAR END PLATE
15 SA630/15 SA631/15 ROTOR BLADE
16 SA630/16 SA631/16 ROTOR
17 SA630/17 SA631/17 CYLINDER
18 SA630/18 SA631/18 FRONT END PLATE
19 SA630/19 SA631/19 BALL BEARING ( B696ZZ )
20 SA630/20 SA631/20 WASHER
21 SA630/21 SA631/21 GEAR
22 SA630/22 SA631/22 PIN
23 SA630/23 SA631/23 GEAR PLATE
24 SA630/24 SA631/24 RING GEAR
25 SA630/25 SA631/25 NEEDLE BEARING
26 SA630/26 SA631/26 NEEDLE BEARING
27 SA630/27 SA631/27 RATCHET HOUSING
28 SA630/28 SA631/28 CRANK SHAFT
29 SA630/29 SA631/29 DRIVE BUSHING
30 SA630/30 SA631/30 YOKE
31 SA630/31 SA631/31 LOCK NUT
32 SA630/32 SA631/32 REVERSE BUTTON
33 SA630/33 SA631/33 SPRING
34 SA630/34 SA631/34 LOCK PIN
35 SA630/35 SA631/35 WASHER
36 SA630/36 SA631/36 PIN
37 SA630/37 SA631/37 RATCHET PAWL
38 SA630/38 SA631/38 STEEL BALL
39 SA630/39 SA631/39 SPRING
41 SA630/41A SA631/41B THRUST WASHER
42 SA630/42 SA631/42 RETAINING RING
43 SA630/43A SA631/43B RATCHET ANVIL
44 SA630/44 SA631/44 BOOT
IMPORTANT WARRANTY INFORMATION
The ratchet heads are supplied fitted with a rubber boot to provide some protection from impact. Because it is
possible to break the head by dropping and also by excessive hand force, we do not warranty ratchet heads.
The rest of the product is covered by a 1 year parts and labour warranty. This does not affect your statutory
rights.