instructions for
AIR REGULATOR, FILTER, LUBRICATOR RANGE
Model nos:
SA106, SA106FR, SA106F, SA106L, SA106R
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
1. SAFETY
WARNING!
Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this equipment.
WARNING!
disconnect the equipment from the air supply before changing accessories, servicing or performing any maintenance.
9
Keep the equipment clean and maintain it in good condition (use an authorised service agent).
9
replace or repair damaged parts.
Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
WARNING!
ensure that the correct air pressure is maintained and not exceeded.
9
Keep air hoses away from heat, oil and sharp edges. check hoses for wear before each use and ensure that all connections are secure.
8
DO NOT
direct air from the air hose at yourself, others or animals.
9
drain the compressor air tank daily. Water in the air line will damage your equipment.
9
When work is complete ensure that the air supply is turned off.
2.
i
INTRODUCTION
suitable for workshop air supply set-ups. regulator features locking control knob for pre-setting air pressure and pressure gauge. filter has
manual drain facility with female 1/8”BsP outlet. lubricator includes oil/air mix control and sight glass. filter and lubricator are fitted with metal bowl
cages for protection. sA106, sA106fr and sA106r supplied with mounting bracket.
3.
i
SpECIFICATION
Original Language Version
© Jack sealey limited
refer to
instruction
manual
Filter/Lubricator/Regulator - SA106
Max. inlet pressure . . . . . . . . . . . . . . . . . . . . 150psi (10.3 bar)
Max. outlet pressure . . . . . . . . . . . . . . . . . . . . 125psi (8.6 bar)
Max. flow rate @ 100psi (6.9 bar) . . . . . . . . . . . . . . . . .60cfm
filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 micron
lubricant . . . . . . . .sealey Air tool oil - Ato/500 or Ato/1000
Ports-inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4”BsP
outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4”BsP
Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/8”BsP
Filter/Regulator - SA106FR
Max. inlet pressure . . . . . . . . . . . . . . . . . . . . 150psi (10.3 bar)
Max. outlet pressure . . . . . . . . . . . . . . . . . . . . 125psi (8.6 bar)
Max. flow rate @ 100psi (6.9 bar) . . . . . . . . . . . . . . . . .70cfm
filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 micron
Ports-inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4”BsP
outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4”BsP
Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/8”BsP
Filter - SA106F
Max. inlet pressure . . . . . . . . . . . . . . . . . . . . 150psi (10.3 bar)
Max. outlet pressure . . . . . . . . . . . . . . . . . . . . 125psi (8.6 bar)
Max. flow rate @ 100psi (6.9 bar) . . . . . . . . . . . . . . . . .53cfm
filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 micron
Ports-inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4”BsP
outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4”BsP
Lubricator - SA106L
Max. inlet pressure . . . . . . . . . . . . . . . . . . . . 150psi (10.3 bar)
Max. outlet pressure . . . . . . . . . . . . . . . . . . . . 125psi (8.6 bar)
Max. flow rate @ 100psi (6.9 bar) . . . . . . . . . . . . . . . . .60cfm
lubricant . . . . . . . .sealey Air tool oil - Ato/500 or Ato/1000
Ports-inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4”BsP
outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4”BsP
sA106/106fr/106f/106l/106r issue: 4 (H, f)- 08/12/17
SA106
SA106FR
SA106F
SA106L
SA106R
