background image

INSTRUCTIONS FOR

ROADSTART EMERGENCY POWER PACKS

MODEL NO’S:

 RS131.V3, RS132 

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

        

1.  SAFETY

IMPORTANT:

 To reduce the risk of a battery explosion, follow these instructions and those published by the battery manufacturer and the 

manufacturer of any equipment you intend to use in the vicinity of the battery. Remember to review warning marks on all products and on 

engines.

1.1. 

 

PERSONAL PRECAUTIONS

 

 Ensure there is another person within hearing range, or close enough to come to your aid should a problem arise, when working  

 

near a lead-acid battery.

 

 Have fresh water and soap nearby in case battery acid contacts skin, clothing or eyes.

 

 Wear safety eye protection and protective clothing. Avoid touching eyes while working with a battery.

 

 Wash immediately with soap and water if battery acid contacts skin or clothing. If acid enters eye, flush eye immediately with cool,    

clean running water for at least 15 minutes and seek immediate medical attention.

 

 Remove personal metallic items such as rings, bracelets, necklaces and watches. A lead-acid battery can produce a short-circuit    

current high enough to weld a ring or the like to metal, which may cause severe burns.

1.2. 

 

IMPORTANT SAFETY INSTRUCTIONS

 

 Familiarise yourself with the applications, limitations and potential hazards of the RoadStart.

 

 Keep the unit in good working order and condition. Replace damaged parts immediately.

 

 Use only recommended parts. To use unapproved parts may be dangerous and will invalidate your warranty. 

 

 The RoadStart must only be opened and checked by qualified service personnel. 

DO NOT

 disassemble the unit for any reason. 

 

 Keep children and unauthorised persons away from the work area.

 

 Keep work area clean and tidy and free from unrelated materials. Ensure that there is adequate lighting.

 

 If the RoadStart receives a sharp knock or blow, it must be checked by a qualified service agent before being used.

 

 When not in use re-charge every two months. 

 

 

DO NOT

 smoke or allow a spark, or flame in the vicinity of the battery or engine.

 

 

DO NOT

 drop any metal item onto the battery as it may spark or short circuit the battery, which could cause an explosion. 

 

 

DO NOT

 use RoadStart to recharge dry cell batteries that are commonly used with home appliances. These batteries may explode and 

cause personal injury and damage to property. 

 

 DO  NOT 

charge or boost a frozen battery.

 

 

DO NOT

 use attachments other than those recommended. To  do so may risk damage to the unit and other equipment and possible 

           personal injury. 

 

 

DO NOT

 pull or carry the unit by its cables and do not pull the  negative and positive clamps from the battery terminals.

 

 

DO NOT

 operate in vicinity of flammable liquids or gases.

 

 

DO NOT

 recharge the unit with plugs, cables or attachments that are damaged. Replace such items immediately.

 

 

DO NOT

 use this product to perform a task for which it is not designed.

 

 

DO NOT

 store the unit in damp or wet locations or where the temperature may exceed 50°C.

 

 

DO NOT

 submerge the unit in water.

Refer to

Instruction 

Manual

Warning:

Explosive

Material

Warning:

Corrosive 

substance

Wear eye

Protection

RS131.V3 RS132 | Issue 5(I) 04/01/16

Original Language Version

© Jack Sealey Limited

IMPORTANT WARRANTY INFORMATION: KEEP YOUR ROADSTART HEALTHY

Read and understand the general safety and operating instructions before use. The following information is intended to help you 

keep the product in top working order.

NOTE – The battery in this unit is a consumable item and its ability to accept charge will reduce over time. We will warranty it 

against mechanical and electrical defect for a period of one year - this does not cover fair wear and tear. 

If the battery is not properly charged before first use, or regularly conditioned, its capacity will diminish. Under these circumstances we will 

not replace the battery even if it is less than one year old.

You can help prolong the lifecycle of the battery by following a few simple guidelines. 

• 

Plug in your new Roadstart to the mains transformer and make an INITIAL charge lasting 38 hours.

• 

Ensure the unit is fully charged before storage.

• 

DO NOT

 leave the Roadstart for longer than 2 months without putting it on charge.

• 

DO NOT

 attempt to start a vehicle when the Roadstart battery voltage is reduced to less than 7Volts.

• 

DO NOT

 drop or roughly handle the Roadstart – this will break or disjoin the battery terminals rendering the battery useless and the 

warranty void.

• 

DO NOT

 use any other charger, other than the one supplied, to recharge the battery.

Wear 

Protective 

Gloves

Warning:

Electricity

Protect 

From 

Rain

Use in

Well 

Ventilated

Areas 

Keep away 

from sources 

of ignition:

Battery could 

explode

Summary of Contents for RS131.V3








Reviews: