Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . 32mm
Free speed . . . . . . . . . . . . . . . . . . . . .4800bpm
Air consumption . . . . . . . . . . . . . . . . . . . . 3cfm
Noise Pressure . . . . . . . . . . . . . . . . . 85 .6dB(A)
Operating pressure . . . . . . . . . . . . . . . . . . 90psi
Air inlet size . . . . . . . . . . . . . . . . . . . . 1/4” BSP
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1kg
Vibration (No Load) . . . . . . . . . . . . . . . .6 .7m/s
The SA52 is a straight type air hammer supplied
with interchangeable needle and chisel heads .
Suitable for cleaning heavy paint and rust scale
from metal surfaces . Palm control trigger
mechanism . Replaceable scaler needle set .
1.
safety instructions
2.
introduction & sPecifications
INSTRUCTIONS FOR:
air fLuX cHiPPer/needLe scaLer
MODEL No:
sa52
PARTS FOR:
air fLuX cHiPPer/needLe scaLer
MODEL No:
sa52
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according
to these instructions and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLease read tHese instructions carefuLLy. note tHe safe oPerationaL
reQuireMents, WarninGs and cautions. use tHis Product correctLy and WitH care for tHe
PurPose for WHicH it is intended. faiLure to do so May cause daMaGe and/or PersonaL
inJury and WiLL inVaLidate tHe Warranty. PLease KeeP instructions safe for future use.
WarninG!
Ensure health & safety, local authority, and general workshop practice regulations
are adhered to when using this equipment.
WarninG!
Disconnect from air supply before changing accessories or servicing .
Maintain the
needle scaler in good condition and replace any damaged or worn parts .
Use
genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
WarninG!
Check correct air pressure is maintained and not exceeded . We recommend 90psi .
Keep air hose away from heat, oil and sharp edges . Check air hose for wear before each
use and ensure that all connections are secure .
Only use needles which are specifically designed for use with a needle scaler .
Wear approved safety eye/face shield, ear defenders, and hand protection .
Maintain correct balance and footing . Ensure the floor is not slippery and wear non-slip shoes .
Keep children and non essential persons away from the working area .
do not
use the needle scaler for a task it is not designed to perform .
WarninG! do not
use needle scaler if damaged or thought to be faulty . (Contact Sealey
service agent) .
do not
use needle scaler unless you have been instructed in its use by a qualified person .
do not
carry the needle scaler by the air hose, or yank the hose from the air supply .
do not
operate scaler if you are tired or under the influence of alcohol, drugs or
intoxicating medication .
do not
carry scaler with your hand on the power trigger in order to avoid unintentional
starting .
do not
direct air from the air hose at yourself or others .
When not in use disconnect from air supply and store in a safe, dry, childproof location .
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice.
iMPortant:
No liability is accepted for incorrect use of this equipment .
Warranty:
Guarantee is 12
months from purchase date . proof of which will be required for any claim .
inforMation:
For a copy of our latest catalogue and
promotions, call us on 01284 757525 and leave your full name and address including your postcode .
01284 757500
01284 703534
sole uK distributor
sealey Group,
Bury St . Edmunds, Suffolk .
www.sealey.co.uk
Web
SA52 Issue No: 3 - 170909