![background image](http://html.mh-extra.com/html/sealey/ms155/ms155_instructions_1227433002.webp)
4. AssEMbLy
Refer to fig.1
4.1.
Screw the siphon pump onto the threaded fitting at the top of the container.
4.2.
Push the universal adaptor into the top of the top of the container.
4.3.
Push the required probe into the inlet hole on the top of the universal adaptor, see fig.2, until tight. For maximum length, the 5mm
probe can be connected to the end of the 8mm probe.
5. OpERATION
5.1.
Before attempting to extract any fluid, ensure that the machine
to be worked on has stopped and is secured against restarting.
5.2.
.
Be aware that engine oil and other fluids may be hot, and take precautions.
5.3.
feed the probe into the appropriate access point (e.g. dip tube)
5.4.
Ensure that the tip of the probe is immersed fully into the fluid.
5.5.
Pump the handle repeatedly until a vacuum is created in the container.
5.6.
continue to pump as required.
5.7.
As the container fills, stop pumping
and monitor the level of fluid in the container.
The pump assembly will be damaged if fluid is
drawn into it.
5.8.
To transport fluid, remove the pump and probe from the container and seal opening securely with the anti-spill cap
5.9.
to empty the container, remove the universal adaptor and pour the contents away.
5.10.
A
lways dispose of waste fluids responsibly and in accordance with local authority regulations.
6. MAINTENANCE
6.1.
clean the unit with warm, soapy water only. the probes may be cleaned by drawing through warm soapy water.
6.2.
dry before storage.
6.3.
regularly check for damage and replace damaged parts as necessary.
6.4.
store in a secure, dry, childproof location when not in use.
Fig.2
NotE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMpORTANT:
no liability is accepted for incorrect use of this product.
WARRANTy:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
sole uK distributor, sealey Group.
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7Ar
www.sealey.co.uk
01284 757500
01284 703534
Web
Environmental protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.
ms155| issue 1 22/0715
Original Language Version
© Jack sealey limited