3500lm Super BooSt rechargeaBle
oSram p9 leD 30W pocket light
Model no:
leD451
thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. Safety
1.1.
geNeral Safety
8
Do Not
shine directly into your, another person’s or an animal’s eyes.
8
Do Not
allow children to use the torch.
8
Do Not
use the torch if you suspect that the battery or the torch casing is damaged.
8
Do Not
leave batteries in a discharged state. Before storage remove batteries and dispose of in the correct manner.
WarNiNg!
Please keep out of reach of children, as lens generates heat on Super Boost setting.
1.2.
Battery Safety
WarNiNg!
To reduce the risk of burns or fire:
8
Do Not
attempt to open the batteries.
8
Do Not
crush, puncture, short contacts or dispose of in fire or water.
8
Do Not
expose to temperatures above 60°C (140°F).
9
Replace only with the batteries designed for this product.
9
Recycle or dispose of used batteries as stipulated by local regulation.
9
If the electrolyte in the batteries gets on your skin, thoroughly rinse with water. If it gets in your eyes, rinse thoroughly with cool
water and seek immediate medical attention.
2. iNtroDuctioN
Triple osram P9 led 10W produces extremely bright, white light with an output of 1400 lumens, with a super boost output of 3500lm for
35 seconds. Working range up to 250 metres. Powered by a rechargeable 3.7V 2Ah li-ion battery. Supplied with micro USB charging lead.
***WARnInG*** Please keep out of reach of children, as lens generates heat on Super Boost setting.
3. SpecificatioN
model No:........................................................................................................................ leD451
Battery: .................................................................................................................3.7V 2Ah li-ion
led Qty: ................................................................................................osram P9 led 10W (x3)
lumen output: ...............................................Super Boost; 3500lm for 35 seconds; High;1400lm
nett Weight: ..................................................................................................................... 0.155kg
Range: ................................................................................................................................. 250m
operating Time: ............................................................................................................................
High: .............................................................................Super Boost for 35 s 1.2hr High
Medium: ................................................................................................................................. 3hrs
low: .......................................................................................................................................10hr
Flash: ...........................................................................................................................1hr 30mins
importaNt WarraNty iNformatioN
The batteries fitted to this lamp are considered to be consumable items and their ability to accept a charge will reduce over time.
We will provide warranty against mechanical and electrical defect for a period of one year - this
DoeS Not
cover fair wear and tear.
If the batteries are not properly charged before first use, or regularly conditioned, their capacity will diminish. Under these
circumstances we will not replace the battery regardless of whether it is less than one year old.
4. operatioN
4.1.
lightiNg SequeNce
4.1.1.
Press the power button (fig.1) once for lowest output, press twice for medium
output, three presses for highest output.
4.1.2.
Press and hold power button for ultra bright mode.
4.1.3.
double press the power button for SoS mode.
4.2.
chargiNg the Battery
4.2.1.
Connect to power source via usb.
4.2.2.
Power button will glow red when charging and change to blue when fully
charged.
Power Button
fig.1
led451 Issue 1 15/05/19
Original Language Version
© Jack Sealey limited
Refer to
instructions
