3. specificAtioN
model no ................................................................... led101
Power ..........................................................................2x10W
led Quantity ........................................................ 12+12smd
lumen output ...........................................................2x800lm
supply ............................................................................110V
min/max Height ....................................................0.61/1.6mtr
colour temperature .....................................................6000K
iP rating .........................................................................iP54
4. opeRAtioN
4.1.
Extend tripod legs to full extent fig.1. Adjust height as required by releasing screw clamps on
telescopic pole, re-tighten clamps at desired height.
4.2.
Position the floodlight in the area that requires illumination, adjusting lamp angle as required
.
4.3.
The floodlights can be removed from the tripod by unscrewing securing nob at the top of the
telescopic pole. Lights can then be placed at floor level fig.2.
4.4.
This LED floodlight develops minimal heat and is not subject to the same restrictions that apply
to halogen lamps that become too hot to touch. We do however recommend that the floodlight
should not be placed in cramped or restrictive situations and recommend the following minimum
distances between the light and any surface/object.
● 500mm minimum between the top of the light and any overhead surface, or objects.
● 200mm between sides of light and end or side walls, surfaces or objects.
● 1 metre minimum between the front of the light and any object to be illuminated.
4.5.
Plug the light into the power supply and switch on .
wARNiNg!
ensure the light is disconnected from the mains power supply when not in use
9
ensure that the unit is cool and dry and is stored in a cool, dry, childproof area.
5. mAiNteNANce
5.1.
clean the casing externally (
not the glass
) with a moist cloth.
8
do Not
use solvents or abrasives.
5.2.
if necessary clean the glass with alcohol and a soft cloth.
Original Language Version
© Jack sealey limited
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
impoRtANt:
no liability is accepted for incorrect use of this product.
wARRANtY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
sole uK distributor, sealey Group.
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7Ar
www.sealey.co.uk
01284 757500
01284 703534
web
environmental protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment.
weee Regulations
dispose of this product at the end of its working life in compliance with the eu directive on Waste electrical and electronic
equipment (Weee). When the product is no longer required, it must be disposed of in an environmentally protective way.
contact your local solid waste authority for recycling information.
parts support is available for this product,
please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.
fig.1
fig.2
led101 | issue1 04/08/16