background image

Declaration of Conformity 

We, the sole importer into the UK, declare that the products listed here

are in conformity with the following standards and directives.

The construction files for these products are held by the Manufacturer and may be inspected, by a national authority,

upon request to Jack Sealey Ltd.

For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products.

3rd May 2002

PORTABLE GENERATORS

Models: 

HG50.25.V2, HG55.28.V2, HG65.30,

HG90.44, HG130.74.V2

98/37/EC Machinery Directive

73/23/EEC Low Voltage Directive

89/336/EEC EMC Directive

BS EN60335 - 1:1995 + Amendments.

Signed by Mark Sweetman

Sole UK Distributor,

Sealey Group,

Bury St. Edmunds, Suffolk.

01284 757500

E-mail: 

[email protected]

01284 703534

NOTE:

It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: 

No liability is accepted for incorrect use of product. 

WARRANTY: 

Guarantee is 12 months from purchase date, proof of which will be required 

for any claim. 

INFORMATION:

For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

6. TROUBLESHOOTING

PROBLEM

CAUSE

ACTION

Engine will not start.

Fuel tap not turned on.

Turn fuel on.

No fuel in tank.

Fill fuel tank.

Oil not filled to correct level.

Fill oil to correct to level.

Engine run switch not turned on.

Set engine control correctly.

Choke not set correctly.

Set engine control correctly.

Spark plug fouled.

Clean/replace spark plug.

Air cleaner blocked.

Clean/replace air filter.

Engine runs rough.

Air cleaner blocked.

Clean/replace air filter.

Spark plug fouled.

Clean/replace spark plug.

Choke set incorrectly.

Set engine control correctly.

Dirty/stale fuel.

Drain and replace fuel.

No electrical output.

Voltage selector switch

incorrectly positioned.

Select the correct voltage.

Circuit breaker tripped.

Re-set circuit breaker.

Rated

CABLE LENGTH

Current (A)

0 - 50 metres

51 - 100 metres

101 - 150 metres

6

1.50mm²

1.50mm²

2.50mm²

8

1.50mm²

2.50mm²

4.00mm²

10

2.50mm²

4.00mm²

6.00mm²

12

2.50mm²

6.00mm²

10.00mm²

16

2.50mm²

10.00mm²

10.00mm²

18

4.00mm²

10.00mm²

10.00mm²

24

4.00mm²

10.00mm²

16.00mm²

26

6.00mm²

16.00mm²

16.00mm²

28

6.00mm²

16.00mm²

16.00mm²

7. CABLE SIZES TO BE USED

8. PARTS LIST

Model No                 

Engine Oil

Spark Plug

Air Filter  

Recoil

Wheel Kit

(Paper Element)

(Optional Extra)

HG50.25.V2

10W-30

9807956846

17211ZL8505

28400ZL8003ZB

HG55.28.V2

15W-40

9807956846

17210ZE1505

28400ZH8013ZA

Gen Kit 1

HG65.30

15W-40

9807956846

17210ZE1505

28400ZH8013ZA

Gen Kit 1

HG90.44

15W-40

9807956846

17210ZE2505

28400ZE2W01ZA

Gen Kit 2

HG130.74.V2

15W-40

9807956846

17210ZE3505

28400ZE3W01ZA

Gen Kit 2

HG50.25.V2, HG55.28.V2, HG65.30, HG90.44, HG130.74.V2. - 3 - 030502

Summary of Contents for HG50.25.V2






Reviews: