Sealey CST806 Instructions Manual Download Page 6

Page: 6 / 6

Environmental protection

recycle unwanted materials instead of disposing of them as waste. all tools, accessories and packaging should be

sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.

When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)

into approved containers and dispose of the product and the fluids according to local regulations.

NOTE:

It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

importaNt:

no liability is accepted for incorrect use of this product.

WarraNty:

Guarantee is 12 months from purchase date, proof of which will be required for any claim.

01284 757500

01284 703534

[email protected]

Sole uk Distributor, Sealey group,

Kempson Way, suffolk Business Park

Bury st. edmunds, suffolk,

IP32 7AR

www.sealey.co.uk

ST806| Issue:3(L) 16/05/17

Original Language Version

ITEM PART NO

DESCRIPTION

ITEM PART NO

DESCRIPTION

1 CST806.01 BOTTOM PANEL

20 CST806.20N NYLON WASHER

2 CST806.02 BACK WHEEL BRACKET

21 CST806.21 HANDLE CONNECTING SLEEVE

3 CST806.03 FRONT WHEEL BRACKET

22 CST806.22 LOCK HANDLE (A)

4 CST806.04 AXLE TURNING ASS'Y (L.H)

23 CST806.23 LOCK HANDLE (B)

5 CST806.05 AXLE TURNING ASS'Y (R.H)

24 CST806.24 LOCK HANDLE SLEEVE

6 CST806.06 TURNING AXLE ASS'Y

25 CST806.25 PLATFORM

7 CST806.07 TOW BAR

26 CST806.26N HEX BOLT (M8x20)

8 CST806.08N CLAMP

27 CST806.27 HEX BOLT (M8x25)

9 CST806.09N SCREW (M5x16)

28 CST806.28 FLAT WASHER (12mm)

10 CST806.10 LEFT & RIGHT SIDE PANEL

29 CST806.29 HINGE R-PIN

11 CST806.11 BACK PANEL

30 CST806.30 LOCK NUT (M8)

12 CST806.12 FRONT PANEL

31 CST806.31 LOCK NUT (M12)

13 CST806.13 PNEUMATIC WHEEL

32 CST806.32 FLAT WASHER (8mm)

14 CST806.14 HANDLE

33 CST806.33 CONNECTING PLATE PIN

15 CST806.15N SPACER BUSHING

34 CST806.34 HANDLE PIN (8x60)

16 CST806.16 HANDLE GRIP

35 CST806.35 R-PIN

17 CST806.17 TOOL BASKET

36 CST806.36 COTTER PIN (3x30)

18 CST806.18 FRONT WHEEL BRACKET ASS'Y

37 CST806.37N LOCK NUT (M5)

19 CST806.19 FLAT PLATE

PARTS FOR
PLATFORM TRUCK with SIDES PNEUMATIC TYRES
MODEL :

CST806

Issue:

Issue Date: 010515

Summary of Contents for CST806







Search results

Summary of Contents for CST806

Reviews:

Related manuals for CST806

Brands by name

Popular brands

Sealey CST806, Instructions Manual

Search results

Summary of Contents for CST806

Reviews:

Related manuals for CST806

Brands by name

Popular brands