4. coNtENtS
5. aSSEmbly
5.1.
Remove the contents from the packaging and check them against the contents list, fig.1. Ensure that all the parts are there and not
damaged. if there are any problems contact your sealey stockist.
5.2.
BACK WHEEL BRACKET ASSEMBLY Refer to fig.2 and A and B on Parts List on back page
5.2.1.
Attach the back wheel bracket assembly (2) to the bottom panel (1), using 2x8mm flat washers (32) and 2xM8 lock nuts (30).
5.3.
BACK WHEEL SUPPORT BAR Refer to fig.3
5.3.1.
Attach the wheel support bar (18), to the back wheel bracket assembly (2) and to the bottom panel (1), using 8mm flat washers (32)
and M8 lock nuts (30).
fig.1
fig.2
fig.3
c
ST806| Issue:3(L) 16/05/17
Original Language Version
© Jack sealey limited
