5.7.
WHEEL ASSEMBLY See fig.7
5.7.1.
Fit spacer bush (15) onto both rear stub axles. (The front spacer bushes are fitted during manufacture). Fit wheels (13) onto each
stub axle and retain with 12mm flat washer (28) and M12 lock nuts (31).
5.8.
HANDLE BAR ASSEMBLY/TOW BAR ASSEMBLY See fig.8, fig.8.1 and parts list on back page for Tow bar
5.8.1.
seek assistance to turn the truck over so that it stands on its wheels.
5.8.2.
Remove the R pin (35) pull out the pivot pin (34) and take out the handle connecting sleeve (21). Fit the handle bar (14) or if
desired the tow bar (7). (The tow bar is stowed within the turning axle assembly), secured with connecting plate pin (33) and R pin
(35).
Feed the handle/tow bar (14/7) through the plastic connecting sleeve, line up the holes in the sleeve and the handle (14) or tow bar
(7) with the turning axle assembly (6), insert the pivot pin (34) and secure with the R pin (35).
fig.7
fig.8
fig.8.1
c
ST806| Issue:3(L) 16/05/17
Original Language Version
© Jack sealey limited
