background image

20V 20CM CORDLESS CHAINSAW HEAD - 

BODY ONLY 

MODEL NO: 

CP20VPSH

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  SAFETY

1.1. 

GENERAL SAFETY

 

9

Familiarise yourself with the applications, limitations and potential hazards peculiar to the 

cordless chain saw.

 

9

R

ead all safety warnings, instructions and specifications provided.

 

9

Maintain the cordless chainsaw in good condition. Check for alignment or binding of 

moving parts and other conditions that may compromise the saws performance.

 

9

Replace or repair damaged parts. Use recommended parts only. Unauthorised parts may 

be dangerous and will invalidate the warranty.

 

9

Keep the cordless chainsaw clean for best and safest performance.

 

9

E

valuate your working area. Determine the presence of any hazards such as power cables, communication cables, fences, walls or 

other solid objects.

 

‰

WARNING!

 Cutting through or touching high voltage cables with the cordless chainsaw could result in death or serious personal 

injury due to electric shock.

 

9

Keep children and unauthorised persons away from the working area.

 

9

K

eep working area clear. Periodically remove fallen cuttings to a safe area to avoid trip hazards.

 

9

O

nly operate the cordless chainsaw in daylight hours with good visibility.

 

9

W

ear suitable ear protection and clothing. Use personal protective equipment (PPE). A full range of personal safety equipment is 

available from your Sealey stockist.

 

‰

WARNING!

 Wear safety helmet, protective eye shield and gloves to protect yourself from falling objects or flying debris.

 

‰

WARNING!

 Wear suitable gloves for the application, 

DO NOT

 wear cloth gloves, these may become entangled within moving parts, 

resulting in possible personal injury.

 

9

R

emove ill fitting clothing. Remove ties, watches, rings, loose jewellery and contain long hair.

1.2. 

CORDLESS CHAINSAW SAFETY

 

9

Keep handles and grasping surfaces clean and free from oil and grease.

 

9

Be alert. Use common sense when operating the cordless chainsaw.

 

8

DO NOT

 operate the cordless chainsaw if any of the parts are missing as this may cause failure and/or possible personal injury.

 

8

DO NOT

 operate the cordless chainsaw when you are tired or under the influence of alcohol, drugs or intoxicating medication.

 

8

DO NOT

 use the cordless chainsaw for a task it is not designed to perform.

 

8

DO NOT

 use the cordless chainsaw if the switch does not turn it on and off.

 

8

DO NOT

 use the cordless chainsaw where there are flammable liquids, solids or gases, such as paint solvents, etc.

 

8

DO NOT

 get the cordless chainsaw wet or use in damp or wet locations.

 

8

DO NOT

 allow children or untrained persons to operate the cordless chainsaw.

 

8

DO NOT

 attempt to modify the cordless chainsaw.

 

8

DO NOT

 use the cordless chainsaw in bad weather conditions, especially when there is the risk of lightning or in darkness.

 

9

B

efore assembling or adjusting the cordless chainsaw, switch off and remove the battery.

 

9

W

ear protective gloves, not cloth gloves, when handling the saw chain or adjusting the chain tension.

 

9

F

requently check the chain tension. Adjust as required.

 

9

R

efill the chain oil as required, using a good quality chain oil.

 

9

I

n the event of an emergency, immediately switch the cordless chainsaw off.

 

8

DO NOT

 use the cordless chainsaw again until the problem has been diagnosed and rectified.

 

9

I

f there is an abnormal occurrence (noise, vibration), during use, immediately switch the cordless chainsaw off.

 

9

U

se the shoulder harness. Keep the cordless chainsaw firmly to your right side.

 

9

Hold the front grip with your left hand and the rear grip with your right hand, regardless if you are left or right handed.

 

9

Fully grasp the grips.

 

9

Hold the cordless chainsaw by the insulated gripping surfaces only. The saw chain may contact hidden wiring which could cause 

personal injury from electric shock.

 

8

DO NOT

 operate the cordless chainsaw with one hand. Loss of control may result in serious personal injury or death.

 

8

DO NOT

 over reach. Maintain correct balance and footing and wear non-slip protective footware.

 

8

DO NOT

 stand on an unstable or slippery surface, or a steep incline. In winter take precautions to maintain secure footing on ice or 

snow.

 

8

DO NOT

 operate the cordless chainsaw whilst standing on a ladder or standing within a tree.

 

9

I

f the cordless chainsaw receives a heavy impact or is dropped, check it’s condition. If there is any damage, however slight, have it 

repaired by an authorised Sealey service centre.

 

8

DO NOT

 leave the cordless chainsaw running unattended. Always switch off and remove the battery.

 

8

DO NOT

 raise your right arm above shoulder height when operating the cordless chainsaw.

 

9

T

ake frequent breaks. Operating the cordless chainsaw when tired may lead to lose of control and personal injury.

C

P20VPSH   Issue 1   2/10/21

Original Language Version

© Jack Sealey Limited

Refer to 

instructions

 Wear eye 

protection

 

Wear protective 

gloves

 Wear ear 

protection

 Wear safety 

footwear

 

Wear protective 

clothing

Wear a

Face shield

 Wear head

protection

Keep away 

from rain

Beware of

Electrical

Power Cables

Summary of Contents for CP20VPSH







Reviews: