p
p
WARNING! DO NOT use saddle if any suspect part is found, or if it is believed to have been subjected to abnormal load or
shock. Immediately remove from service and contact your authorised service agent.
p
p
p
WARNING! Always read, understand and implement these safety and operating instructions supplied with the saddle
and those
supplied with the jack
.
p
WARNING! Failure to assemble the saddle correctly may result in serious damage and/or personal injury.
Unpack the product and check contents against the parts listed in these instructions. Should there be any damaged or missing parts
contact your supplier immediately.
Note:
Items 6, 7, 8, 12,14 and 15 have been pre-assembled.
3.1.
Attach brackets (2) to the base plate (6) with screws (13), washers (11) and nuts (9).
3.2.
Attach braces (1) to brackets with screws (13), washers (11) and nuts (9).
3.3.
Attach chain (large link end) to one brace with screw (13), washers (11) and nut (9).
3.4.
Fit adjuster retainer (3) to diagonally opposite brace using washer (11) and nut (9).
3.5.
Slide chain adjuster (5) through retainer and fit wing nut (10).
3. PARTS LIST & ASSEMBLY
ADT1 & ADT2 - (0001) - (2) - 100701
4. OPERATING INSTRUCTIONS
4.1.
With jack fully down remove existing fixed saddle from jack and fit the ADT1 or ADT2.
4.2.
Adjusting the pitch and tilt of saddle will assist you to safely support and transport the transmission.
The saddle may be tilted forward, backward and side to side up to 20
O
by operating the appropriate handles (14).
p
WARNING! After adjusting the angle of the saddle always make sure that all four adjusting screws are in contact with the underside
of the base plate. This will ensure that the saddle does not move during use, which would endanger both the transmission and the operator.
4.3.
Always position brackets (2) and braces (1) to best support/locate transmission and ensure all screws are retightened. Before moving
jack and transmission ensure that restraint chain is in place and tensioned by wing nut (10).
4.4.
Periodically lubricate the saddle pivot points and the adjusting screws.
Item
Part No.
Description
1 - ADT1
100/9057600
Brace
1 - ADT2
100/9059100
Brace
2 - ADT1
100/9057700
Bracket
2 - ADT2
100/9059200
Bracket
3
100/9058000
Retainer, chain adjuster
4
100/9058600
Chain
5
100/9058700
Adjuster, chain
6 - ADT1
100/9058900
Base plate
6 - ADT2
100/9058700
Base plate
7
100/9059800
Housing, universal joint
8
100/9059900
Universal joint
9
100/0200200
Nut
10
100/0200900
Wing nut
11
100/0211600
Washer
12
100/0231900
Screw
13 - ADT1
100/0233400
Screw
13 - ADT2
100/0232300
Screw
14
100/0245200
Handle
15
100/0248700
Screw
Original Date:- 060899
Issue Date:-
060899
Version No:- 1
Date Modified:- 1st issue
Declaration of Conformity
We, the sole importer into the UK, declare that the products listed here are in conformity with the following standards and directives.
The construction files for these products are held by the Manufacturer and may be inspected,
by a national authority, upon request to Jack Sealey Ltd.
For Jack Sealey Ltd. Sole importer into the UK of Sealey Quality Machinery.
Adjustable Jack Saddle
Models: ADT1 & ADT2
98/37/EC Machinery Directive
10th July 2001
01284 757500
E-mail:
01284 703534
Sole UK Distributor, Sealey Group,
Bury St. Edmunds, Suffolk.
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required
for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Signed by Mark Sweetman