©Sealevel Systems, Inc.
HazPAC R9-8.4 Manual
20
SL9257 8/2015
To avoid accidental damage, be sure to follow proper ESD procedures by grounding yourself and the
board.
Use a standard USB device cable and connect the Type B connector to the HazPAC R9-8.4. Connect Type A
connector into the host system.
(See Figure 2.)
Figure 2.
Type B USB Device Connector.
You are now ready to set up a USB communication interface between the host PC and the HazPAC R9-8.4.
Depending on which operating system you are using – Windows 7, Vista, or XP – the setup experience will
vary.