11
© Sealevel Systems, Inc. 3588 Manual | SL9008 9/2022
Physical Installation
Extreme care should be taken when installing the SIO-104-+8.485 to avoid causing damage to the
connectors. After the adapter is installed, connect your I/O cable(s) to the 40-pin headers located at J1
and J2. Refer to Hardware Setup for information on setting the address and jumper options before
inserting the SIO-104-+8.485 onto the stack.
Do not install the Adapter in the machine until the software has been fully installed.
1.
Turn off PC power. Disconnect the power cord.
2.
Gently insert the SIO-104-+8.485 connector noting proper key orientation of the expansion
connector on a PC/104 compatible card. The SIO-104-+8.485 adapter is keyed per the current
PC/104 Specification. This will aid in preventing the adapter from being inserted incorrectly.
3.
Mounting hardware (nylon stand-offs and screws) is provided to ensure a good mechanical
connection. Retain any mounting hardware not used to allow for future expansion.
4.
Remove the case cover (if applicable).
5.
Connect the power cord and power up the machine.
The SIO-104-+8.485 is now ready for use.
